luci/modules/luci-mod-network/htdocs, branch master

luci-mod-network: add scrolling to wireless scan results modal

2026-10-05T17:35:43Z

Allow scrolling of wireless scan results within the modal. Signed-off-by: Sergei S.

luci-mod-network: hide incompatible encryption modes for 6 GHz

2026-10-01T18:42:34Z

The WiFi 6E (6 GHz) standard mandates WPA3 and management frame protection. While wifi-scripts already silently upgrades mixed modes (psk-sae -> sae) on 6 GHz radios, the LuCI encryption dropdown still offers all WPA2/WPA/WEP options, leading to confusing hostapd failures when users pick an unsupported mode. When the radio band is 6 GHz, hide encryption options that are incompatible with the standard: - WPA2-PSK, WPA-PSK, WPA-PSK/WPA2-PSK Mixed Mode - WPA2-PSK/WPA3-SAE Mixed Mode (6 GHz does not allow WPA2 fallback) - WPA2-EAP, WPA-EAP, WPA2-EAP/WPA3-EAP Mixed Mode - WEP - No Encryption (6 GHz requires protected management frames) This leaves WPA3-SAE, WPA3-EAP, WPA3-EAP 192-bit, and OWE as the available choices for 6 GHz interfaces. Signed-off-by: Michael Pfeifroth

treewide: wrap loose view content in cbi-section

2026-09-06T18:47:04Z

Views that returned headings, tables and control rows with nothing around them now wrap that content in a section: the system and kernel logs, Processes, the nftables and iptables views, Startup, the wireless station list, DSL stats and the package manager. The nftables rule tables also drop an !important that no theme could override. Nothing changes in the stock bootstrap theme; themes that draw .cbi-section as a panel get the structure they need. Signed-off-by: Ivan Kvashonkin

luci-mod-network: fix capitalization of "WLAN Roaming" tab

2026-07-21T09:21:56Z

The WLAN roaming tab label used a lowercase "r" in "roaming", inconsistent with the title-case convention used by other tabs (e.g. "MAC-Filter", "Advanced Settings"). Capitalize it to "WLAN Roaming" and update the msgid in all translation files. Signed-off-by: Michael Pfeifroth

luci-mod-network: correct link bonding setting

2026-07-19T07:37:27Z

netifd only understands packets_per_port which it converts/writes to sysfs packets_per_slave. Also, the value 0 is valid. Closes #8830 Signed-off-by: Paul Donald

luci-mod-network: add auto-negotiation, phy speed and duplex

2026-07-19T07:23:44Z

Some settings that were missing from the device configuration have been added to control auto-negotiation, PHY speed, duplex, and rx/tx pause. If the interface has available Phy links speeds, those values will be used, otherwise, static values will be used, such as 10Mbps half/full. 100Mbps half/full, 1Gbps full, 2.5Gbps full, etc... Signed-off-by: Matheus Sampaio Queiroga

luci-mod-network: fix available wifi channels

2026-07-09T09:32:07Z

rpcd iwinfo freqlist does not set a `no_ir` field. It is instead a flag so check in the flags list instead. Signed-off-by: Samuele Yang

luci-mod-network: wireless: add gcmp256, sae_ext_key, transition_disable

2026-07-08T23:28:44Z

Expose three per-BSS WPA3 tuning options in the wireless security tab: - gcmp256: advertise the GCMP-256 pairwise cipher - sae_ext_key: advertise the SAE-EXT-KEY AKM (SAE using a group-dependent hash, aka SAE-GDH) - transition_disable: signal Transition Disable (WPA3 Specification v3.5 section 13) so a client that connected once no longer downgrades GCMP-256 and SAE-EXT-KEY are mandatory for Wi-Fi 7 (EHT) but break interoperability with some clients. The wifi-scripts backend therefore defaults them on only for WPA3-Personal Compatibility Mode (sae-compat) on an EHT radio, and off everywhere else. The gcmp256/sae_ext_key checkboxes mirror that default, derived from both the encryption mode and the radio htmode, so the box shows the real default: leaving it untouched keeps the option unset (the backend decides), while toggling it writes an explicit override. As htmode is a radio property, not a wifi-iface one, it is read from the current selection of the radio's frequency widget (falling back to the saved config) instead of a same-section dependency. transition_disable is offered only for the WPA3-only modes where the signalled bitmap is non-empty. Assisted-by: Claude:claude-opus-4-8 Link: https://github.com/openwrt/luci/pull/8790 Signed-off-by: Hauke Mehrtens

luci-mod-network: wireless: add WPA3-Personal Compatibility Mode

2026-07-08T23:28:39Z

Expose the sae-compat encryption mode (WPA3-Personal Compatibility Mode) in the wireless security settings. It advertises WPA2-PSK in the base RSNE while offering SAE through RSN Override elements, so that both legacy WPA2 and modern WPA3 clients can connect to a single SSID. The mode relies on RSN overriding, which is an access-point feature, so it is offered for AP mode only. It gets the passphrase field and, like the other WPA2/WPA3 modes, the 802.11r, KRACK-countermeasure and WPS options. Assisted-by: Claude:claude-opus-4-8 Link: https://github.com/openwrt/luci/pull/8790 Signed-off-by: Hauke Mehrtens

luci-mod-network: don't show Carrier on dynamic/alias interface

2026-07-07T14:39:46Z

Carrier is always Absent on dynamic/alias interface. Don't show Carrier on dynamic/alias interface. Signed-off-by: Coia Prant