<feed xmlns='http://www.w3.org/2005/Atom'>
<title>firmware/qca-wireless, branch main</title>
<subtitle>Qualcomm Wireless Device BDF</subtitle>
<id>https://git-03.infra.openwrt.org/project/firmware/qca-wireless/atom?h=main</id>
<link rel='self' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/atom?h=main'/>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/'/>
<updated>2026-11-19T10:39:53Z</updated>
<entry>
<title>ipq8074: add Netgear RBK860 BDFs</title>
<updated>2026-11-19T10:39:53Z</updated>
<author>
<name>Maximilian Brandt</name>
</author>
<published>2026-10-25T14:50:20Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=6d7ddb81dfd1f641f96c94aef62a050ee4e46bf5'/>
<id>urn:sha1:6d7ddb81dfd1f641f96c94aef62a050ee4e46bf5</id>
<content type='text'>
For use in Netgear RBR860 (router) and RBS860 (satellite).

Unlike the RBK850, the router and the satellite use different board
data, so the file carries one variant for each of them.

Extracted from the Netgear RBR860 firmware version 7.2.8.8
(RBR860-V7.2.8.8.zip):

Netgear-RBR860: /lib/firmware/IPQ8074/bdwlan.bin
                (identical to IPQ8074/bdwlan.b215 and FCC/bdwlan.b215)
Netgear-RBS860: /lib/firmware/IPQ8074/bdwlan.b215.RBK850
                (the RBS860 stock firmware uses this file as its
                IPQ8074/bdwlan.bin)

Both differ from the board data in board-netgear_rbk850.ipq8074.

ath11k-bdencoder -i board-netgear_rbk860.ipq8074
FileSize: 262340
FileCRC32: c27ac456
FileMD5: 103b48eab28ff619c3dd6402aa608a1f
BoardNames[0]: 'bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Netgear-RBR860'
BoardLength[0]: 131072
BoardCRC32[0]: f2533fef
BoardMD5[0]: c90f39cee9f2270552b9bf64576079a0
BoardNames[1]: 'bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Netgear-RBS860'
BoardLength[1]: 131072
BoardCRC32[1]: a8710864
BoardMD5[1]: d27f96cdb9dcbb1b8a48744418b0bd02

Signed-off-by: Maximilian Brandt &lt;me@brandtm.de&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/187
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq5018: add Lite-On WPX8324 BDFs</title>
<updated>2026-11-16T20:08:57Z</updated>
<author>
<name>Ayra Hikari</name>
</author>
<published>2026-11-13T04:16:58Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=c832ed2cfbd42350bc2f683175952d341f737ec0'/>
<id>urn:sha1:c832ed2cfbd42350bc2f683175952d341f737ec0</id>
<content type='text'>
Add board-2.bin files for the Lite-On WPX8324, an IPQ5018 access point
with an integrated IPQ5018 2.4 GHz radio and a QCN6122 5 GHz radio.

The BDFs are derived from the vendor board files published in the
Telecom Infra Project wlan-ap tree (commit e4181847, "Updating the board
files for Liteon WPX8324"), re-encoded as board-2.bin with the
calibration variant string set to Lite-On-WPX8324.

Signed-off-by: Ayra Hikari &lt;ayrahikari@linuxmail.org&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/196
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq5018/qcn9074: add Ubiquiti UniFi 6 Pro board files</title>
<updated>2026-11-16T19:34:58Z</updated>
<author>
<name>Davíð Steinn Geirsson</name>
</author>
<published>2026-10-30T17:12:20Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=8f2057e29da8b40ea58cd14085c8762b26f41ad7'/>
<id>urn:sha1:8f2057e29da8b40ea58cd14085c8762b26f41ad7</id>
<content type='text'>
Add BDFs for the Ubiquiti UniFi 6 Pro, extracted unchanged from the
stock firmware 8.8.13 (lib/firmware/platforms/a650/): bdwlan.b23 for
the IPQ5018 2.4 GHz radio and bdwlan.ba0 for the QCN9074 5 GHz radio.
Both radios report QMI board ID 255.

board-ubnt_unifi-6-pro.ipq5018:
FileSize: 131180
FileCRC32: 322eede6
FileMD5: b4488aa031007e4e2aaa7065a4f50699
BoardNames[0]: 'bus=ahb,qmi-chip-id=0,qmi-board-id=255,variant=Ubiquiti-U6-Pro'
BoardLength[0]: 131072
BoardCRC32[0]: 718d7978
BoardMD5[0]: 491515d57037acd8b370bb8fa48a2b97

board-ubnt_unifi-6-pro.qcn9074:
FileSize: 131180
FileCRC32: ef39c66c
FileMD5: e5327e949b094d3d585e472bb74850c5
BoardNames[0]: 'bus=pci,qmi-chip-id=0,qmi-board-id=255,variant=Ubiquiti-U6-Pro'
BoardLength[0]: 131072
BoardCRC32[0]: bebf3b04
BoardMD5[0]: 2ee7bca54e3df6e2d5f98a40a42798c6

Signed-off-by: Davíð Steinn Geirsson &lt;david@dsg.is&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/195
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq4019: add Aruba IPQ4019 BDFs</title>
<updated>2026-11-12T18:16:51Z</updated>
<author>
<name>David Bauer</name>
</author>
<published>2026-11-12T01:39:19Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=e1c4cbaf43917e19779dbf9f8e276e31116bcaef'/>
<id>urn:sha1:e1c4cbaf43917e19779dbf9f8e276e31116bcaef</id>
<content type='text'>
My extraction method for the BDFs of Aruba Access Points was incorrect,
leading to the wrong BDFs being used.

There are BDFs embedded in the umac.ko, however they are either outdated
or not at all correct for the HW.

The correct BDFs were embedded in the kernel image itself as embedded
firmware.

Signed-off-by: David Bauer &lt;mail@david-bauer.net&gt;
</content>
</entry>
<entry>
<title>qca9990: add Aruba AP-325 BDF</title>
<updated>2026-11-12T18:16:51Z</updated>
<author>
<name>David Bauer</name>
</author>
<published>2026-11-12T01:06:32Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=bb53fb2659dff13b9922232ee27a426f519246b6'/>
<id>urn:sha1:bb53fb2659dff13b9922232ee27a426f519246b6</id>
<content type='text'>
The BDF is embedded in the kernel of the Aruba AP-325.

Signed-off-by: David Bauer &lt;mail@david-bauer.net&gt;
</content>
</entry>
<entry>
<title>qcn9074: add Arista C-360 BDF</title>
<updated>2026-10-31T10:03:02Z</updated>
<author>
<name>Christopher Griffin</name>
</author>
<published>2026-10-16T16:52:11Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=5363395811fb3c72da0e62304a26d995c0f9c675'/>
<id>urn:sha1:5363395811fb3c72da0e62304a26d995c0f9c675</id>
<content type='text'>
This adds the Arista C-360 BDF for its QCN9074 card, the 6 GHz radio on
PCIe 0 (variant Arista-C360-pcie0), and its QCN9072 card, the 2.4/5/6 GHz
radio on PCIe 1 (variant Arista-C360-pcie1), which ath11k drives as a
QCN9074. The vendor firmware picks its board data per country at boot
(LINK_BOARD_DATA); these are its FCC_CE files, for the US and the EU and
the fallback for a country without its own, in the vendor default radio
plan:

- lib/boarddata/radio3/user/FCC_CE/bdwlan.bab_6G_full (PCIe 0)
- lib/boarddata/radio4/user/FCC_CE/bdwlan.baa (PCIe 1)

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Christopher Griffin &lt;christophergriffin05@gmail.com&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/176
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq8074: add Arista C-360 BDF</title>
<updated>2026-10-31T10:03:02Z</updated>
<author>
<name>Christopher Griffin</name>
</author>
<published>2026-10-16T16:52:11Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=e50b0217afcc970a2ce4b6d88a18a4bb28767a01'/>
<id>urn:sha1:e50b0217afcc970a2ce4b6d88a18a4bb28767a01</id>
<content type='text'>
This adds the Arista C-360 BDF for the integrated IPQ8074 2.4 GHz and
5 GHz radios. The vendor firmware picks its board data per country at
boot (LINK_BOARD_DATA); this is its FCC_CE set, for the US and the EU
and the fallback for a country without its own, in the vendor default
radio plan (6 GHz on the PCIe 0 card, all of 5 GHz here):

- lib/boarddata/radio12/user/FCC_CE/bdwlan.b290_2G_5G_full

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Christopher Griffin &lt;christophergriffin05@gmail.com&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/176
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq4019: add Gryphon Guardian BDF</title>
<updated>2026-10-29T14:07:27Z</updated>
<author>
<name>Koen van Mierlo</name>
</author>
<published>2026-10-25T17:02:32Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=9157db7cf0814d91adf552ebfd13bbdef0b1c00a'/>
<id>urn:sha1:9157db7cf0814d91adf552ebfd13bbdef0b1c00a</id>
<content type='text'>
Add BDF for the Gryphon Guardian router, extracted from the
vendor firmware: boardData_1_0_IPQ4019_DK04_2G.bin and
boardData_1_0_IPQ4019_DK04_5G.bin

FileSize: 24324
FileCRC32: 2d4846b5
FileMD5: b22fdc2709d234107966d2ea00e6c3ab
BoardNames[0]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=20,variant=Gryphon-Guardian'
BoardLength[0]: 12064
BoardCRC32[0]: 825572a6
BoardMD5[0]: ec91be0620de9578cd210b12b18ab057
BoardNames[1]: 'bus=ahb,bmi-chip-id=0,bmi-board-id=21,variant=Gryphon-Guardian'
BoardLength[1]: 12064
BoardCRC32[1]: 6cfb4f7c
BoardMD5[1]: 5279c10932f18c97827f70a034240c57

Signed-off-by: Koen van Mierlo &lt;k.j.vanmierlo@gmail.com&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/188
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq9574/qcn9074: add Nokia Beacon 10 board files</title>
<updated>2026-10-29T14:01:44Z</updated>
<author>
<name>Liu Yu</name>
</author>
<published>2026-10-23T02:45:34Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=eab1e7ba21d913d56296a3bbfa0b264bba25850d'/>
<id>urn:sha1:eab1e7ba21d913d56296a3bbfa0b264bba25850d</id>
<content type='text'>
Add board data from Nokia Beacon 10 stock firmware 3TN00367LJLJ17 for
the integrated IPQ9574/QCN5024 2.4 GHz radio and the two PCIe QCN9024
radios using the QCN9074 board format.

Package the original bdwlan.b20, bdwlan.ba3 and bdwlan.ba2 payloads
unchanged in board-2 containers. Use these calibration variants:
- Nokia-Beacon-10 for the AHB 2.4 GHz radio
- Nokia-Beacon-10-5G for the PCIe 5 GHz radio
- Nokia-Beacon-10-6G for the PCIe 6 GHz radio

All three radios report QMI chip-id 0 and board-id 255. The variants
select the appropriate board data for each radio. Per-device calibration
is supplied separately from ART through NVMEM.

Tested all three radio probes, 2.4/5 GHz AP operation and CN country
selection on a Nokia Beacon 10.

Signed-off-by: Liu Yu &lt;dfly0603@163.com&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/181
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq6018: add Redmi AX5 JDCloud (RA50) board file</title>
<updated>2026-10-29T12:59:42Z</updated>
<author>
<name>Michael Yang</name>
</author>
<published>2026-10-13T02:56:49Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/project/firmware/qca-wireless/commit/?id=3796b7f7e1011604b03df3818f5583d12c48d988'/>
<id>urn:sha1:3796b7f7e1011604b03df3818f5583d12c48d988</id>
<content type='text'>
This adds the board file for the Redmi AX5 JDCloud (RA50), which uses the
integrated IPQ6018 2.4/5 GHz radio.

The board data was extracted from the ART partition of the device
(offset 0x1000, size 0x10000) and packed with ath11k-bdencoder using the
calibration variant "Redmi-AX5-JDCloud".

The matching OpenWrt device support is submitted separately.

Signed-off-by: Michael Yang &lt;zzduci@gmail.com&gt;
Link: https://github.com/openwrt/firmware_qca-wireless/pull/172
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
</feed>
