bcm63xx/u-boot/post/tests.c, branch master

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Drop the log buffer

2017-12-07T20:17:00Z

This does not appear to be used by any boards. Before introducing a new log system, remove this old one. Signed-off-by: Simon Glass Reviewed-by: Bin Meng

powerpc, 8xx: remove support for 8xx

2017-06-12T12:37:55Z

There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher

post: Delete unnecessary bitmask of POST_MANUAL from POST_ALWAYS

2016-04-01T21:17:43Z

Since POST_ALWAYS is defined as: #define POST_ALWAYS (POST_NORMAL | \ POST_SLOWTEST | \ POST_MANUAL | \ POST_POWERON ) there is no need to redundantly bitmask it with POST_MANUAL. Signed-off-by: Robert P. J. Day

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38Z

Signed-off-by: Wolfgang Denk [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini

POST: add new memory regions test

2011-10-05T20:03:11Z

This test is similar to the actual POST memory test but quicker and far less complete. It checks the address and data lines and then only tests some regularly placed sub regions of the RAM. This can be useful when we want to test the RAM but we do not have enough time to run the full memory test. The POST memory test code was rearranged in order to avoid code duplication between the two tests but the memory test functionnality remains the same. Signed-off-by: Valentin Longchamp Signed-off-by: Holger Brunck Ackey-by: Mike Frysinger

Blackfin: post: generalize led/button tests with GPIOs

2011-09-29T20:38:05Z

Make it easy for any Blackfin board to enable led/push button tests. Signed-off-by: Mike Frysinger

post: new nor flash test

2011-07-26T14:49:44Z

This adds a simple flash test to automatically verify erasing, writing, and reading of sectors. The code is based on existing Blackfin tests but generalized for everyone to use. Signed-off-by: Mike Frysinger

post: use ARRAY_SIZE

2011-07-26T14:48:33Z

We've got a handy dandy macro already for calculating the number of elements in an array, so use it. Signed-off-by: Mike Frysinger

ppc4xx/POST: Add board specific UART POST test to lwmon5

2010-10-20T08:08:08Z

Add CONFIG_POST_UART to implement a board specific UART POST test. This is done since lwmon5 needs to set POST_ALWAYS to run this test on each reboot. And we don't want to change the default behavious of this this. Signed-off-by: Stefan Roese