bcm63xx/u-boot/include/linux/usb, branch master

usb: composite: Move bitmap related operations to ./include/linux/bitmap.h

2018-12-14T16:59:08Z

The BITMAP related operations can now be moved to ./include/linux/bitmap.h file to mimic the Linux kernel directory tree. This change also allows to remove the lin_gadget_compat.h header file (which is a legacy code only for composite U-boot layer). It was also possible to remove #includes from several USB gadget drivers. Signed-off-by: Lukasz Majewski Reviewed-by: Stefan Agner

usb: udc: implement DM versions of usb_gadget_initialize()/_release()/_handle_interrupt()

2018-12-07T15:31:45Z

When DM_USB_GADGET the platform code for the USB device must be replaced by calls to a USB device driver. usb_gadget_initialize() probes the USB device driver. usb_gadget_release() removes the USB device driver. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Lukasz Majewski

usb: gadget: Do not call board_usb_xxx() directly in USB gadget drivers

2018-12-07T15:31:45Z

Add 2 functions to wrap the calls to board_usb_init() and board_usb_cleanup(). This is a preparatory work for DM support for UDC drivers (DM_USB_GADGET). Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Lukasz Majewski

usb: musb-new: Fix improper musb host pointer

2018-08-23T12:01:24Z

When MUSB is operating in peripheral mode, probe registering musb core using musb_register which intern return int value for validation. so there is no scope to preserve struct musb pointer but the same can be used in .remove musb_stop. So fix this by return musb_register with struct musb pointer. Cc: Igor Grinberg Cc: Purna Chandra Mandal Tested-by: Chen-Yu Tsai # A33-OlinuXino Tested-by: Jagan Teki Signed-off-by: Jagan Teki

usb: common: add support to get maximum speed from dt

2018-05-18T11:23:10Z

Add support to get maximum speed from dt so that usb drivers makes use of it for DT parsing. Signed-off-by: Mugunthan V N Signed-off-by: Michal Simek (rebase and fix errors) Reviewed-by: Simon Glass

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

armv8: ls1088ardb: Enable USB command RDB qspi-boot

2017-10-27T15:47:06Z

Signed-off-by: Ashish Kumar Signed-off-by: Amrita Kumari Signed-off-by: Ran Wang Reviewed-by: Bin Meng Reviewed-by: York Sun

usb: xhci: Honor endpoint's interval

2017-10-01T14:32:54Z

USB endpoint reports the period between consecutive requests to send or receive data as bInverval in its endpoint descriptor. So far this is ignored by xHCI driver and the 'Interval' field in xHC's endpoint context is always programmed to zero which means 1ms for low speed or full speed , or 125us for high speed or super speed. We should honor the interval by getting it from endpoint descriptor. Signed-off-by: Bin Meng

arm: usb: dra7xx: xHCI registers based on USB port index

2017-05-08T15:38:36Z

Modify the determination of the base address of xHCI registers of DRA7XX targets. Before the commit: by the target. After the commit: by the USB port index. Cc: Lokesh Vutla Cc: Marek Vasut Cc: Roger Quadros Signed-off-by: Uri Mashiach Reviewed-by: Marek Vasut Reviewed-by: Tom Rini Reviewed-by: Roger Quadros Acked-by: Marek Vasut Acked-by: Marek Vasut

ARM: omap2+: rename config to ARCH_OMAP2PLUS and consolidate Kconfig

2017-04-27T20:49:08Z

In Linux, CONFIG_ARCH_OMAP2PLUS is used for OMAP2 or later SoCs. Rename CONFIG_ARCH_OMAP2 to CONFIG_ARCH_OMAP2PLUS to follow this naming. Move the OMAP2+ board/SoC choice down to mach-omap2/Kconfig to slim down the arch/arm/Kconfig level. Signed-off-by: Masahiro Yamada Reviewed-by: Tom Rini