bcm63xx/u-boot/include/dm, branch master

dm: Add a No-op uclass

2019-07-05T12:19:41Z

This uclass is intended for devices that do not need any features from the uclass, including binding children. This will typically be used by devices that are used to bind child devices but do not use dm_scan_fdt_dev() to do it. That is for example the case of several USB wrappers that have 2 child devices (1 for device and 1 for host) but bind only one at a any given time. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Simon Glass

dm: pinctrl: Add driver-strength-microamp property

2019-06-12T09:50:02Z

Add drive-strength-microamp property support to allow drive strength in uA Signed-off-by: Guillaume La Roque Tested-by: Neil Armstrong Signed-off-by: Neil Armstrong

drivers: spi: cf_spi: convert to driver model

2019-05-24T12:11:57Z

Converting to driver model and removes non-dm code. Reviewed-by: Simon Glass Signed-off-by: Angelo Dureghello

core: ofnode: Have ofnode_read_u32_default return a u32

2019-05-21T23:33:23Z

It was returning an int, which doesn't work if the u32 it is reading, or the default value, will overflow a signed int. While it could be made to work, when using a C standard/compiler where casting negative signed values to unsigned has a defined behavior, combined with careful casting, it seems obvious one is meant to use ofnode_read_s32_default() with signed values. Cc: Simon Glass Signed-off-by: Trent Piepho

core: ofnode: Add ofnode_get_addr_size_index

2019-05-21T23:33:23Z

Add ofnode_get_addr_size_index function to fetch the address and size of the reg space based on index. Signed-off-by: Keerthy Reviewed-by: Simon Glass

Merge branch 'master' of git://git.denx.de/u-boot-sh

2019-05-06T11:19:31Z

- Various pinctrl / gpio fixes for R-Car

dm: cache: Create a uclass for cache

2019-05-05T12:48:50Z

The cache UCLASS will be used for configure settings that can be found in a CPU's L2 cache controller. Add a uclass and a test for cache. Reviewed-by: Simon Glass Signed-off-by: Dinh Nguyen

pinctrl: gpio: Add callback for configuring pin as GPIO

2019-05-04T17:26:49Z

Add callback to configure, and de-configure, pin as a GPIO on the pin controller side. This matches similar functionality in Linux and aims to replace the ad-hoc implementations present in U-Boot. Signed-off-by: Marek Vasut Cc: Alex Kiernan Cc: Christoph Muellner Cc: Eugeniu Rosca Cc: Patrice Chotard Cc: Patrick DELAUNAY Cc: Philipp Tomsich Cc: Simon Glass

dm: core: Change platform specific translation-offset handling

2019-04-24T02:26:43Z

Testing has shown that the current DM implementation of a platform / board specific translation offset, as its needed for the SPL on MVEBU platforms is buggy. The translation offset is confingured too late, after the driver bind functions are run. This may result in incorrect address translations. With the current implementation its not possible to configure the offset earlier, as the DM code has not run at all. This patch now removed the set_/get_translation_offset() calls and moves the translation offset into the GD variable translation_offset. This variable will get used when CONFIG_TRANSLATION_OFFSET is enabled. This option is enabled only for MVEBU on ARM32 platforms, where its currenty needed and configured in the SPL. Signed-off-by: Stefan Roese Cc: Pierre Bourdon Cc: Baruch Siach Cc: Simon Glass Cc: Heiko Schocher Cc: Tom Rini Tested-by: Pierre Bourdon Tested-by: Baruch Siach

dm: remove unused function dm_fdt_pre_reloc

2019-04-12T02:10:48Z

The function dm_ofnode_pre_reloc should be used instead of the function dm_fdt_pre_reloc and avoid duplicated code. Signed-off-by: Patrick Delaunay Reviewed-by: Simon Glass