bcm63xx/u-boot/include/configs/xpress.h, branch master

Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig

2019-05-04T17:04:12Z

This converts the following to Kconfig: CONFIG_SUPPORT_EMMC_BOOT As requested by Michal Simek , these boards have no eMMC so CONFIG_SUPPORT_EMMC_BOOT has not been migrated: xilinx_zynqmp_zc1275_revB xilinx_zynqmp_zc1751_xm018_dc4 xilinx_zynqmp_zc1751_xm019_dc5 xilinx_zynqmp_zcu100_revC xilinx_zynqmp_zcu102_rev1_0 xilinx_zynqmp_zcu102_revA xilinx_zynqmp_zcu102_revB xilinx_zynqmp_zcu104_revA xilinx_zynqmp_zcu104_revC xilinx_zynqmp_zcu106_revA xilinx_zynqmp_zcu111_revA Signed-off-by: Alex Kiernan Acked-by: Lukasz Majewski Acked-by: Patrick Delaunay Acked-by: Ramon Fried Reviewed-by: Andy Shevchenko Tested-by: Sébastien Szymanski

Convert CONFIG_MII et al to Kconfig

2018-08-17T17:03:54Z

This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford Acked-by: Jagan Teki Acked-by: Joe Hershberger

configs: Migrate CONFIG_NR_DRAM_BANKS

2018-08-16T20:45:02Z

We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig

2018-02-24T02:41:49Z

This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford [trini: Re-run the migration] Signed-off-by: Tom Rini

i.mx6ul: xpress: update UART init for current board revision

2017-10-12T15:58:42Z

UART pinmux has been changed on the last board revision. Change board pinmux accordingly. Console is on UART7 now, add pinmux, base address and update console string in environment. Signed-off-by: Anatolij Gustschin Reviewed-by: Stefano Babic

Move PHYLIB to Kconfig

2017-08-07T20:22:28Z

Signed-off-by: Alexandru Gagniuc Acked-by: Joe Hershberger

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

2017-07-26T01:08:01Z

This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass Signed-off-by: Tom Rini

imx: reorganize IMX code as other SOCs

2017-07-12T08:17:44Z

Change is consistent with other SOCs and it is in preparation for adding SOMs. SOC's related files are moved from cpu/ to mach-imx/. This change is also coherent with the structure in kernel. Signed-off-by: Stefano Babic CC: Fabio Estevam CC: Akshay Bhat CC: Ken Lin CC: Marek Vasut CC: Heiko Schocher CC: "Sébastien Szymanski" CC: Christian Gmeiner CC: Stefan Roese CC: Patrick Bruenn CC: Troy Kisky CC: Nikita Kiryanov CC: Otavio Salvador CC: "Eric Bénard" CC: Jagan Teki CC: Ye Li CC: Peng Fan CC: Adrian Alonso CC: Alison Wang CC: Tim Harvey CC: Martin Donnelly CC: Marcin Niestroj CC: Lukasz Majewski CC: Adam Ford CC: "Albert ARIBAUD (3ADEV)" CC: Boris Brezillon CC: Soeren Moch CC: Richard Hu CC: Wig Cheng CC: Vanessa Maegima CC: Max Krummenacher CC: Stefan Agner CC: Markus Niebel CC: Breno Lima CC: Francesco Montefoschi CC: Jaehoon Chung CC: Scott Wood CC: Joe Hershberger CC: Anatolij Gustschin CC: Simon Glass CC: "Andrew F. Davis" CC: "Łukasz Majewski" CC: Patrice Chotard CC: Nobuhiro Iwamatsu CC: Hans de Goede CC: Masahiro Yamada CC: Stephen Warren CC: Andre Przywara CC: "Álvaro Fernández Rojas" CC: York Sun CC: Xiaoliang Yang CC: Chen-Yu Tsai CC: George McCollister CC: Sven Ebenfeld CC: Filip Brozovic CC: Petr Kulhavy CC: Eric Nelson CC: Bai Ping CC: Anson Huang CC: Sanchayan Maity CC: Lokesh Vutla CC: Patrick Delaunay CC: Gary Bisson CC: Alexander Graf CC: u-boot@lists.denx.de Reviewed-by: Fabio Estevam Reviewed-by: Christian Gmeiner

Kconfig: USB: Migrate existing USB_EHCI_xxx options

2017-05-15T17:00:26Z

The following options are migrated over fully now: - USB_EHCI_ATMEL - USB_EHCI_MARVELL - USB_EHCI_MX6 - USB_EHCI_MX7 - USB_EHCI_MSM - USB_EHCI_ZYNQ - USB_EHCI_GENERIC This also requires fixing the depends on USB_EHCI_MARVELL as it's used by Orion5X and Kirkwood as well. Cc: Marek Vasut Signed-off-by: Tom Rini Reviewed-by: Marek Vasut