bcm63xx/u-boot/include/configs/openrd.h, branch master

arm: kirkwood: openrd: Increase U-Boot size in flash to make it fit

2019-04-26T05:35:38Z

We have run now multiple times into size issues with the openrd board port. To finally fix this, this patch now moves the U-Boot size from 0x6.0000 to 0x8.0000, giving enough space for the next time. This also changes the environment location and potentially the MTD partitioning, but I see no better fix for now. Especially since this board does not have an active maintainer. Signed-off-by: Stefan Roese Cc: Chris Packham Reviewed-by: Chris Packham Signed-off-by: Stefan Roese

arm: kirkwood: openrd: Remove superfluous CONFIG_ENV_ADDR

2019-04-26T05:35:38Z

Remove the superfluous CONFIG_ENV_ADDR definition. Its not needed as CONFIG_ENV_OFFSET is also set to the same value. Signed-off-by: Stefan Roese Cc: Chris Packham Reviewed-by: Chris Packham Signed-off-by: Stefan Roese

openrd: Once again shrink binary size

2018-07-27T11:56:59Z

With some recent changes to relevant drivers here the openrd board (openrd_client in this case) does not fit within its size constraint. We can however drop the slightly extended baudrate table and then the duplication of mtdparts/mtdids in the default environment. These defaults are set in the environment by the 'mtdparts' command and otherwise referenced throughout the code. Signed-off-by: Tom Rini

Convert CONFIG_MTD_PARTITIONS et al to Kconfig

2018-07-22T23:20:17Z

This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford

configs: remove CONFIG_SYS_MVFS

2018-05-29T08:37:52Z

This was being used by some Marvell boards to enable some file system related features (many of which have already been moved to Kconfig). Make the future migration of the final 2 or 3 config options easier by expanding #define CONFIG_SYS_MVFS into the options that it enables and remove CONFIG_SYS_MVFS. Signed-off-by: Chris Packham Reviewed-by: Simon Glass Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

ARM: Drop unreferenced CONFIG_MACH_* defines

2018-01-10T13:05:50Z

These macros are all defined once and never checked or used anywhere: CONFIG_MACH_ASPENITE CONFIG_MACH_DAVINCI_CALIMAIN CONFIG_MACH_DOCKSTAR CONFIG_MACH_EDMINIV2 CONFIG_MACH_GOFLEXHOME CONFIG_MACH_GONI CONFIG_MACH_GURUPLUG CONFIG_MACH_KM_KIRKWOOD CONFIG_MACH_OPENRD_BASE CONFIG_MACH_SHEEVAPLUG Almost all of them were only used for the mach_is_foo() logic in arch/arm/asm/mach-types.h that were dropped in commit f9dadaef8b75fa ("arm: Re-sync asm/mach-types.h with Linux Kernel v4.9") Signed-off-by: Tuomas Tynkkynen

Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULT

2017-11-05T16:21:35Z

We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford #omap3_logic Signed-off-by: Tom Rini

configs: Migrate CMD_NAND*

2017-07-31T16:21:40Z

Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the defconfig files. Tested-by: Adam Ford Signed-off-by: Tom Rini Reviewed-by: Bin Meng

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

2017-07-26T01:08:01Z

This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass Signed-off-by: Tom Rini