bcm63xx/u-boot/include/configs/mx6cuboxi.h, branch master

imx: move CONFIG_VIDEO_IPUV3 to defconfigs

2019-04-13T18:30:09Z

Signed-off-by: Anatolij Gustschin

Convert CONFIG_MII et al to Kconfig

2018-08-17T17:03:54Z

This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford Acked-by: Jagan Teki Acked-by: Joe Hershberger

configs: Migrate CONFIG_NR_DRAM_BANKS

2018-08-16T20:45:02Z

We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini

mx6cuboxi: Move the default environment for all devices

2018-07-23T08:56:06Z

Previously we had stored the environment right after the u-boot.img on the disk. I never liked this because with dtbs being included and such the image could grow in size. Instead we move the environment to be negatively offset from the 1MB mark. Almost all our images start at 4MB's, and most standard images start at 1MB, and all our storage devices are a minimum 1MB. Therefore we can store env there for all classes of devices and have plenty of space in case u-boot.img needs to grow. Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach Reviewed-by: Fabio Estevam

mx6cuboxi: Add emmc device tree suffix

2018-07-23T08:17:04Z

Mainline and now the SolidRun 4.9 nxp based tree use the new reorganization of device-tree files that separate out the emmc into its own dtb. u-boot will now look for -emmc in the device tree name if one is detected. Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach

mx6cuboxi: drop CONFIG_SYS_FSL_USDHC_NUM

2018-07-23T08:17:04Z

This macro is not used. Signed-off-by: Baruch Siach

mx6cuboxi: consolidate board detection and add som revision checking

2018-06-18T14:50:40Z

In order to properly detect the board the checks need to be done in a specific order. Move these tests back into a single enum function that will always return the proper the board it is checking. This also adds the best test we have for detecting the rev 1.5 som, and it simplifies the device-tree filename building. Signed-off-by: Jon Nettleton Signed-off-by: Baruch Siach Reviewed-by: Fabio Estevam

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12Z

When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini

Migrate CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig

2018-04-09T03:05:58Z

Convert CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG to Kconfig Signed-off-by: Alex Kiernan Reviewed-by: Lukasz Majewski Reviewed-by: Petr Vorel Reviewed-by: Petr Vorel

Remove config_distro_defaults.h

2018-02-24T02:44:22Z

With the contents of config_distro_defaults.h migrated to Kconfig, we can remove this header file completely Signed-off-by: Adam Ford