bcm63xx/u-boot/env, branch master

Merge branch 'master' of git://git.denx.de/u-boot-spi

2019-06-17T15:32:22Z

- Drop zipitz2 board (Tom) - Add DEPRECATED option (Tom) - Mark legacy or non-dm drivers as DEPRECATED (Jagan)

Kconfig: Add SPI / SPI_FLASH as dependencies

2019-06-13T07:21:06Z

In order to use CMD_SF / CMD_SPI / ENV_IS_IN_SPI_FLASH we need to have the SPI (or SPI_FLASH/DM_SPI_FLASH, for CMD_SF) enabled. Express this in the Kconfigs. Signed-off-by: Tom Rini Reviewed-by: Jagan Teki

env: allow ENV_IS_NOWHERE with other storage target

2019-06-06T15:40:13Z

Allow U-Boot to get default environment for some boot mode (USB for example), and to select storage location when it is booting from flash device; ENVL_NOWHERE is present in env_locations with other one. Signed-off-by: Patrick Delaunay

env: ext4: Allow overriding interface, device and partition

2019-06-06T15:40:13Z

For platform which can boot on different device, this allows to override interface, device and partition from board code. Signed-off-by: Patrice Chotard

env: solve compilation error in SPL

2019-05-23T09:36:48Z

Solve compilation issue when cli_simple.o is used in SPL and CONFIG_SPL_ENV_SUPPORT is not defined. env/built-in.o:(.data.env_htab+0xc): undefined reference to `env_flags_validate' u-boot/scripts/Makefile.spl:384: recipe for target 'spl/u-boot-spl' failed make[2]: *** [spl/u-boot-spl] Error 1 u-boot/Makefile:1649: recipe for target 'spl/u-boot-spl' failed make[1]: *** [spl/u-boot-spl] Error 2 Signed-off-by: Patrick Delaunay

stm32mp1: Move ENV_SIZE and ENV_OFFSET to Kconfig

2019-05-23T09:36:46Z

Add arch stm32mp for ENV migration step and drop more items from include/configs/xxx.h. Signed-off-by: Patrick Delaunay

env: spi: Fix incorrect entry description

2019-05-09T23:52:55Z

Fix the max frequency entry description, it's incorrect. Signed-off-by: Marek Vasut Cc: Chris Brandt Cc: Jagan Teki Cc: Tom Rini

env: Don't check CONFIG_ENV_OFFSET_REDUND for SPL build

2019-04-12T12:05:48Z

When booting using an SPL on am335x, if we want to support booting with the boot ROM loader via USB (which uses RNDIS, making bootp and tftp calls) we need to enable gadget eth in the SPL to load the main U-Boot image. To enable CONFIG_SPL_ETH_SUPPORT, we must enable CONFIG_SPL_ENV_SUPPORT as the environment is used by the eth support, but we don't actually need to have environment variables saved in the SPL environment. We do however have environment variables saved in the main U-Boot image and enable CONFIG_ENV_OFFSET_REDUND (we are storing in raw NAND). In such instances, even with the build config enabling both CONFIG_CMD_SAVEENV and CONFIG_CMD_NAND, these options aren't set when building the SPL, but CONFIG_ENV_OFFSET_REDUND still is. Don't check this configuration option for SPL builds to enable the above configuration. Signed-off-by: Martyn Welch Reviewed-by: Tom Rini

fs: ext4: Add support for the creation of symbolic links

2019-04-10T00:03:30Z

Re-use the functions used to write/create a file, to support creation of a symbolic link. The difference with a regular file are small: - The inode mode is flagged with S_IFLNK instead of S_IFREG - The ext2_dirent's filetype is FILETYPE_SYMLINK instead of FILETYPE_REG - Instead of storing the content of a file in allocated blocks, the path to the target is stored. And if the target's path is short enough, no block is allocated and the target's path is stored in ext2_inode.b.symlink As with regulars files, if a file/symlink with the same name exits, it is unlinked first and then re-created. Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini [trini: Fix ext4 env code] Signed-off-by: Tom Rini

Convert CONFIG_ENV_SPI_* to Kconfig

2019-03-25T21:36:59Z

This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay