bcm63xx/u-boot/drivers/pinctrl, branch master

pinctrl: uniphier: Add SPI pin-mux settings

2019-06-29T13:21:26Z

Add pin-mux settings for SPI controller. Signed-off-by: Kunihiko Hayashi Signed-off-by: Masahiro Yamada

Merge tag 'u-boot-amlogic-20190612' of git://git.denx.de/u-boot-amlogic

2019-06-12T19:28:34Z

- pinctrl: meson-gx: fix GPIO_TEST_N and GPIOCLK_ groups - pinctrl: meson-gxbb: add hdmi related pins to fix HDMI on GXBB - pinctrl: meson: add support for getting pinmux status - pinctrl: meson-g12a: add support for drive-strength-microamp property

pinctrl: meson-gxbb: add hdmi related pins

2019-06-12T09:50:02Z

The GXBB pinctrl is missing pins related to HDMI, namely hot plug detection (hpd) and I2C (sda + scl). This fixes HDMI support for GXBB in u-boot. Reported-by: Mohammad Rasim Signed-off-by: Maxime Jourdan Acked-by: Neil Armstrong Tested-by: Mohammad Rasim Signed-off-by: Neil Armstrong

pinctrl: meson: g12a: add DS bank value

2019-06-12T09:50:02Z

add drive-strength bank regiter and bit value for G12A SoC Signed-off-by: Guillaume La Roque Tested-by: Neil Armstrong Signed-off-by: Neil Armstrong

pinctrl: meson: add support of drive-strength-microamp

2019-06-12T09:50:02Z

drive-strength-microamp is a new feature needed for G12A SoC. the default DS setting after boot is usually 500uA and it is not enough for many functions. We need to be able to set the drive strength to reliably enable things like MMC, I2C, etc ... Signed-off-by: Guillaume La Roque Tested-by: Neil Armstrong Signed-off-by: Neil Armstrong

pinctrl: meson-axg: add support for getting pinmux status

2019-06-12T09:50:02Z

In order to support the "pinmux status" command, use the common functions to get the pins count and names, and add the AXG specific function to get the current function from registers. Signed-off-by: Neil Armstrong

pinctrl: meson-gx: add support for getting pinmux status

2019-06-12T09:50:02Z

In order to support the "pinmux status" command, use the common functions to get the pins count and names, and add the GX specific function to get the current function from registers. Signed-off-by: Neil Armstrong Tested-by: Maxime Jourdan

pinctrl: meson: add common function to get pins name

2019-06-12T09:50:02Z

In order to support the "pinmux status" command, add common function to get pins count and pin name. Signed-off-by: Neil Armstrong

pinctrl: meson-gx: fix GPIO_TEST_N and GPIOCLK_ groups

2019-06-12T09:50:02Z

The GPIO_TEST_N was in the wrong pmx group table, move it back with the AO groups, GPIODV_18 was missing, add it back, and finally the GPIOCLK_* group names were missing. Signed-off-by: Neil Armstrong

pinctrl: imx: Define imx6_pinctrl_soc_info in .data section

2019-06-11T08:43:00Z

This commit is necessary to be able to re-use the pinctrl code in early SPL to properly configure pins. The problem is that those "static" structures (without explicit initialization) are placed in the SDRAM area, which corresponds to u-boot proper (not even SPL). Hence, when one wants to configure pins before relocation via DTS/DM, the board hangs (imx6q SoC powered one) as only OCRAM area is available (0x009xxxxx). This commit prevents from this issue by moving the imx6_pinctrl_soc_info structure to data section (from BSS). Signed-off-by: Lukasz Majewski Reviewed-by: Peng Fan