bcm63xx/u-boot/drivers/clk/at91/Makefile, branch masterBroadcom-s U-Boothttps://git-03.infra.openwrt.org/project/bcm63xx/u-boot/atom?h=master2018-03-16T11:30:04Zclk: at91: add PLLADIV driver2018-03-16T11:30:04ZWenyou Yang2018-02-09T03:34:51Zurn:sha1:fed0509c92e0fe29d0ddc9c743719d22c95b7596
As said in the SAMA5D2 datasheet, the PLLA clock must be divided
by 2 by writing the PLLADIV2 bit in PMC_MCKR, if the ratio between
PCK and MCK is 3 (MDIV = 3). This is the purpose of the driver.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
clk: at91: add USB Host clock driver2018-03-16T11:30:04ZWenyou Yang2018-02-09T03:34:50Zurn:sha1:cb0cb1b0cf20687cf980fbd64c56224f06d566aa
Add USB clock driver to configure the input clock and the divider
in the PMC_USB register to generate a 48MHz and a 12MHz signal to
the USB Host OHCI.
Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
clk: at91: Add clock driver2016-08-15T20:12:00ZWenyou Yang2016-07-20T09:55:12Zurn:sha1:9e5935c04e891abb38a92a893f3457cdf304ef4f
The patch is referred to at91 clock driver of Linux, to make
the clock node descriptions in DT aligned with the Linux's.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>