bcm63xx/u-boot/common/spl, branch master

spl: atf: Fix uninitialized pointer to bl31_image_info

2019-07-02T02:30:02Z

The pointer to struct atf_image_info in bl31_params_mem.bl31_params.bl31_image_info is not initialized before being dereferenced. This can cause U-Boot to crash right before jumping to the BL31 ATF binary. Signed-off-by: Frieder Schrempf Fixes: bcc1726a7bdd ("spl: add support to booting with ATF") Reviewed-by: Kever Yang

Merge tag 'u-boot-imx-20190628' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2019-06-28T12:00:22Z

Fixes for 2019.07 - menlo board - allow SDB on Sabre - HAB for mx6sl - apalis board

usb: gadget: f_sdp: Allow SPL to load and boot FIT via SDP

2019-06-27T11:50:28Z

Add support for loading u-boot FIT images over the USB SDP protocol in the SPL Signed-off-by: Frieder Schrempf [Various build fixes] Signed-off-by: Sjoerd Simons Tested-by: Fabio Estevam Tested-by: Lukasz Majewski

Merge branch 'master' of git://git.denx.de/u-boot-usb

2019-06-17T15:27:21Z

- Assorted gadget fixes

configs: Migrate the various SPL_BOOT_xxx choices for PowerPC

2019-06-14T20:10:49Z

The non-CONFIG_SPL_FRAMEWORK SPL used on some PowerPC platforms have a choice between CONFIG_SPL_NAND_BOOT, CONFIG_SPL_MMC_BOOT and CONFIG_SPL_SPI_BOOT. Migrate this to Kconfig Signed-off-by: Tom Rini

usb: gadget: error out if g_dnl registration fails

2019-06-14T10:39:50Z

If g_dnl_register fails return an error rather then stubornly continuing onwards. Signed-off-by: Sjoerd Simons

spl: dfu: Fix printed variable name

2019-06-14T10:39:50Z

The SPL DFU uses dfu_alt_info_N variable name to determine the DFU configuration, where N is the name of the media (e.g. ram). It does not use the plain dfu_alt_info. Print the name of the missing env variable in case of a failure instead of printing dfu_alt_info, which is just the name of the parameter passed to spl_dfu_cmd(). Signed-off-by: Marek Vasut Cc: Tom Rini

Merge tag 'u-boot-imx-20190612' of git://git.denx.de/u-boot-imx

2019-06-11T17:41:24Z

u-boot-imx-20190612 -------------------- - Board fixes: - imx6logic - wandboard - mx6sabre boots again - imx8qm_mek - pico-* boards - Toradex apalis / colibri - engicam imx6 (environment) - KP MX53 - opos6ul - Switch to DM: - vining2000 - dh MX6 - Toradex colibri i.MX7 - Novena - Security : fix CSF size for HAB - Other: - imx: fix building for i.mx8 without spl - pcie and switch to DM mx6sabreauto: Enable SPL SDP support

spl: imx6: Provide a SPL_SIZE_LIMIT default

2019-06-11T08:43:00Z

As explained in include/configs/imx6_spl.h. the i.MX6 SPL size limit is 68KB (4KB header + 64KB max size). Provide such limit for all i.MX6 boards that use SPL to detect SPL size overflow in build time. Signed-off-by: Fabio Estevam Reviewed-by: Lukasz Majewski

Merge tag 'u-boot-atmel-fixes-2019.07-a' of git://git.denx.de/u-boot-atmel

2019-06-10T13:41:00Z

First set of u-boot-atmel fixes for 2019.07 cycle