svn-archive/archive/target/linux/ramips/dts, branch masterOpenWrt SVN historyhttps://git-03.infra.openwrt.org/openwrt/svn-archive/archive/atom?h=master2016-05-10T22:37:24Zramips: Change all '/include/' clauses to '#include' so preprocessing can be done properly for the entire device trees.2016-05-10T22:37:24ZLuka Perkov2016-05-10T22:37:24Zurn:sha1:2a522a9142cb41495ec6e8a4bfe75fee11145913
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
SVN-Revision: 49357
ramips: Add hex prefix (0x) to dtsi reg properties where needed.2016-05-10T22:37:15ZLuka Perkov2016-05-10T22:37:15Zurn:sha1:e6c7cf739be6196d92268890ba7fc6d9fbce6443
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
SVN-Revision: 49356
ramips: introduce serial0 aliases2016-05-10T22:37:14ZLuka Perkov2016-05-10T22:37:14Zurn:sha1:c79ae7c45f8e419695db0582e73fa20f87eeda57
This patch introduces serial0 aliases in the ramips DTS files, which can
then be used to denote the active console instead of relying on bootargs.
Signed-off-by: Stanislav Galabov <sgalabov@gmail.com>
SVN-Revision: 49355
ramips: Disable all ethernet ports except port 0 on A5-V11.2016-05-02T18:51:13ZJohn Crispin2016-05-02T18:51:13Zurn:sha1:c9981d124106dbc7f3b6920f67827f442124ec0e
Port 0 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 49292
ramips: Disable all ethernet ports except port 4 on HT-TM02.2016-05-02T18:51:09ZJohn Crispin2016-05-02T18:51:09Zurn:sha1:f486ff64dcd046d7a318ef4622973020a04e694c
Port 4 is the only ethernet port on this router, so disable all other PHYs
in order to save power.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 49291
ramips: add support for Planex MZK-EX750NP.2016-04-29T11:34:56ZJohn Crispin2016-04-29T11:34:56Zurn:sha1:e05cc286ec19fa634eb7d991fc49582047074735
add support for Planex MZK-EX750NP.
MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater.
Built-in power supply.
64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 49268
ramips: Add support for the Netgear WNDR3700v52016-04-26T11:43:53ZJohn Crispin2016-04-26T11:43:53Zurn:sha1:6d3612218bfc814935c1311f59bcd92829c98c52
https://wiki.openwrt.org/toh/netgear/wndr3700
wndr3700v5 uses the single-core dual thread MediaTek MT7621S SoC.
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
SVN-Revision: 49247
ramips: add support for Planex MZK-EX300NP2016-04-26T11:43:06ZJohn Crispin2016-04-26T11:43:06Zurn:sha1:2a3617fd2132c535fe17fd803a64d8918ac55ac9
MZK-EX300NP is MT7620A based wifi repeater.
Built-in power supply.
64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 49235
ramips: add support for Planex CS-QR102016-04-26T11:43:01ZJohn Crispin2016-04-26T11:43:01Zurn:sha1:1cf9c4721fe25c2952509dcc403580c4d49f9dbd
CS-QR10 is MT7620A based IP Camera.
the camera and sound does not work with kernel 4.4.
- camera chip is sn9c291.
- sound chip is wm8960.
Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>
SVN-Revision: 49234
ramips: Add support for ZBT WG35262016-04-21T19:47:08ZJohn Crispin2016-04-21T19:47:08Zurn:sha1:23bef4bc61724a419ca165c66ccc6966c05f5e59
The WG3526 is the follow-up to the 2626 and is mostly the same, with the
excaption that the mt7602 has been replaced with the mt7603. The internal wifi
setup has also changed slightly. Based on my tests, everything that worked on
the 2626 works on the 3526 and with roughly the same performance.
v1->v2:
* Remove some references to 2626 that I had missed in the dts.
v2->v3:
* Update patch to match new file structure.
* Removed SD driver to be consistent with other MT7621 targets.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
SVN-Revision: 49213