staging/stintel/package/kernel, branch master

kernel: modules: add kmod-tpm-crb kernel module package

2026-10-12T22:45:26Z

It is used by firmware-based TPMs in modern AMD/Intel/ARM processors. Signed-off-by: Jan Klos Link: https://github.com/openwrt/openwrt/pull/24443 Signed-off-by: Hauke Mehrtens

linux/modules: add kmod-leds-lp5569

2026-10-11T19:28:57Z

Add a kernel module package for the TI LP5569 RGB LED controller driver, used by the front panel LEDs of the Zyxel NBG7815. The driver registers an i2c and an of device table, so AutoProbe is enough and no load priority is needed. The boot flag is kept, as the other LED modules do, so that the module is available to preinit on a device that signals boot state through one of its LEDs. Signed-off-by: André Valentin

kernel: crypto: package the ChaCha20 cipher for chacha20poly1305 on 6.18

2026-10-11T18:59:07Z

On 6.18 the rfc7539(chacha20,poly1305) template takes its ChaCha20 skcipher from crypto/chacha.ko, which CRYPTO_CHACHA20POLY1305 selects but no package ships, and which needs lib/crypto/libchacha.ko. Instantiating rfc7539esp(chacha20,poly1305) for IPsec then fails with ENOSYS. Ship chacha.ko with kmod-crypto-chacha20poly1305 on 6.18, load it before the template and depend on kmod-crypto-lib-chacha20 for libchacha.ko. Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Julius Bairaktaris Link: https://github.com/openwrt/openwrt/pull/25544 Signed-off-by: Robert Marko

kernel: select evdev for HID only with input-support

2026-10-11T18:08:34Z

Since kmod-input-evdev depends on input-support, kmod-hid and kmod-usb-hid are hidden without it, and so is everything selecting kmod-hid: kmod-bluetooth, kmod-hci-uart and kmod-btusb. A device that lists one of them in DEVICE_PACKAGES fails to build as a single profile: ERROR: unable to select packages: kmod-hci-uart (no such package): Neither module needs evdev, so select it only with input-support. Fixes: a7c50f7d7398 ("input-support: add a package for input device handling") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Julius Bairaktaris Link: https://github.com/openwrt/openwrt/pull/25565 Signed-off-by: Nick Hainke

kernel: add kmod-phram package

2026-10-11T07:53:36Z

phram exposes a physical memory range as a read-write MTD device. This can be used to access RAM regions reserved by firmware or described in the device tree. Of particular interest, phram nodes carved out of the reserved region can survive soft reboots, making it a useful primitive to pass one-shot bootenv overrides to uboot (fw_setenv -c) without the risk of bricking, having to wire up a serial console etc. This patch does the kernel module enablement, paving the way for potential userspace integrations further down the line (ubus, procd, sysupgrade etc.) Run-tested on Linksys E8450 (UBI) with OpenWrt uboot. Signed-off-by: Gary Dotzler Link: https://github.com/openwrt/openwrt/pull/25692 Signed-off-by: Nick Hainke

kernel: netsupport: add kmod-sched-dualpi2

2026-10-11T07:36:43Z

Add the Dual Queue Coupled AQM (RFC 9332) queuing discipline, which gives L4S traffic a low latency without starving classic traffic. It is available since kernel 6.17, tc supports it already. Link: https://github.com/openwrt/openwrt/pull/25779 Signed-off-by: Nick Hainke

kernel: netsupport: add kmod-sched-act-gate

2026-10-11T07:29:58Z

Add the gate tc action (IEEE 802.1Qci), which passes or drops ingress packets based on a time schedule. It is used for Time-Sensitive Networking. Link: https://github.com/openwrt/openwrt/pull/25777 Signed-off-by: Nick Hainke

kernel: netsupport: add kmod-sched-etf

2026-10-11T07:29:58Z

Add the Earliest TxTime First queuing discipline, which sends packets at the time set with SO_TXTIME. It is used for Time-Sensitive Networking, also together with taprio in txtime-assist mode. Link: https://github.com/openwrt/openwrt/pull/25777 Signed-off-by: Nick Hainke

kernel: netsupport: add kmod-sched-taprio

2026-10-11T07:29:57Z

Add the Time Aware Priority (IEEE 802.1Qbv) queuing discipline, used for Time-Sensitive Networking. The Hellcreek switch driver depends on taprio, so disable it to avoid a new config prompt. Link: https://github.com/openwrt/openwrt/pull/25777 Signed-off-by: Nick Hainke

kernel: netsupport: add kmod-sched-cbs

2026-10-11T07:29:57Z

Add the Credit Based Shaper (IEEE 802.1Qav) queuing discipline, used for Time-Sensitive Networking. Link: https://github.com/openwrt/openwrt/pull/25777 Signed-off-by: Nick Hainke