<feed xmlns='http://www.w3.org/2005/Atom'>
<title>staging/stintel/package/firmware, branch master</title>
<subtitle>Staging tree of Stijn Tintel</subtitle>
<id>https://git-03.infra.openwrt.org/openwrt/staging/stintel/atom?h=master</id>
<link rel='self' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/atom?h=master'/>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/'/>
<updated>2026-11-16T20:24:36Z</updated>
<entry>
<title>qualcommax: ipq50xx: add support for Ubiquiti UniFi 6 Pro</title>
<updated>2026-11-16T20:24:36Z</updated>
<author>
<name>Daniel Plank</name>
</author>
<published>2026-11-08T01:42:38Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=6d802f61486c141dd17ca4f521393e8bfd6a1389'/>
<id>urn:sha1:6d802f61486c141dd17ca4f521393e8bfd6a1389</id>
<content type='text'>
Specification:

- SoC        Qualcomm IPQ5018, dual-core Cortex-A53
- RAM        1 GiB
- Flash      8 MiB SPI-NOR (Macronix MX25U6435F)
             4 GiB eMMC
- WLAN       2.4 GHz 2x2 802.11ax, IPQ5018 (SoC)
             5 GHz 4x4 802.11ax, Qualcomm QCN9074 (PCIe)
- Ethernet   1x 10/100/1000 Mbps, IPQ5018 internal GE PHY
- Buttons    1x reset
- LEDs       1x white, 1x blue (GPIO)
- UART       J8 next to the reset button, pin order (starting at the
             button): GND, TX, RX, VCC; 1.8 V logic, VCC pin 3.3 V;
             115200 8N1
- Power      802.3at PoE

eMMC layout (GPT):

  p1 0:HLOS    64 MiB  kernel0
  p2 0:HLOS_1  64 MiB  kernel1
  p3 bs         1 KiB  boot select
  p4 cfg        1 MiB  config
  p5 log        2 GiB

"bs" selects the boot slot:

  00 00 00 00 2b e8 4d a3  slot 0 (0:HLOS)
  ff ff ff ff 2b e8 4d a3  slot 1 (0:HLOS_1)

Tested with stock firmware BZ.6.6.65 and BZ.6.8.2, both with U-Boot
v1.0.25.152.

The default boot command "bootubnt" verifies images against the RSA key
"uap_ipq50xx" in the U-Boot control FDT. OpenWrt is therefore started
with "bootm" after removing /signature from the control FDT.

Flash instructions:

1. SSH into the stock firmware (ubnt:ubnt by default) via its DHCP
   assigned address, or the default 192.168.1.20

2. Copy the sysupgrade image over:

     scp -O openwrt-qualcommax-ipq50xx-ubnt_unifi-6-pro-squashfs-sysupgrade.bin \
         ubnt@&lt;ap&gt;:/tmp/openwrt.bin

3. Check the partition names:

     grep PARTNAME /sys/block/mmcblk0/mmcblk0p2/uevent   # 0:HLOS_1
     grep PARTNAME /sys/block/mmcblk0/mmcblk0p3/uevent   # bs
     grep PARTNAME /sys/block/mmcblk0/mmcblk0p5/uevent   # log

4. Unlock the partitions and unmount the log partition:

    [ -e /proc/ubnthal/.uf ] &amp;&amp; echo 5edfacbf &gt; /proc/ubnthal/.uf
    until umount /tmp/log 2&gt;/dev/null; do
        kill $(lsof | grep "\t/tmp/log/" | cut -f1)
    done

5. Write kernel and rootfs:

     tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-pro/kernel -O | \
         dd of=/dev/mmcblk0p2
     tar xf /tmp/openwrt.bin sysupgrade-ubnt_unifi-6-pro/root -O | \
         dd of=/dev/mmcblk0p5

6. Set up the U-Boot environment:

     a='fdt addr ${fdtcontroladdr}; fdt rm /signature;'
     b='mmc read 0x50000000 0x20022 0x20000; bootm 0x50000000#config@a650'
     fw_setenv boot_openwrt "$a $b"
     a='mmc read 0x44000000 0x40022 1; if itest.l *0x44000000 == 0xffffffff;'
     b='then run boot_openwrt; else bootubnt; fi'
     fw_setenv bootcmd_real "$a $b"

7. Boot from slot 1:

     printf '\xff\xff\xff\xff\x2b\xe8\x4d\xa3' | dd of=/dev/mmcblk0p3
     reboot

OpenWrt should now be reachable at its DHCP assigned address.

Reverting to stock firmware from OpenWrt:

  printf '\x00\x00\x00\x00\x2b\xe8\x4d\xa3' &gt; /dev/mmcblk0p3
  fw_setenv bootcmd_real bootubnt
  fw_setenv boot_openwrt
  reboot

The stock firmware reformats the log partition as ext4 on its first
boot, which removes the OpenWrt rootfs.

Notes:

- Ubiquiti filed two FCC IDs, SWX-U6PRO (2020) and SWX-U6PROR (2021, which
  adds Bluetooth LE). My unit (PCBA 113-00963-48) has GPIO-driven
  white/blue LEDs and an unpopulated footprint for an LED MCU, so a
  revision with an MCU-driven LED (like the U6-LR v1) may exist.

MAC addresses:

  LAN   : EEPROM 0x0 (label)
  2.4GHz: label + 1
  5GHz  : label + 2

Assisted-by: Claude:claude-opus-5-5
Signed-off-by: Daniel Plank &lt;tyrolyean@escpe.net&gt;
Link: https://github.com/openwrt/openwrt/pull/26562
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq-wifi: update to Git HEAD (2026-11-16)</title>
<updated>2026-11-16T20:14:01Z</updated>
<author>
<name>Robert Marko</name>
</author>
<published>2026-11-16T20:13:50Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=9a0a0b58f6710a1e8d40ceac39815fab75fc3f85'/>
<id>urn:sha1:9a0a0b58f6710a1e8d40ceac39815fab75fc3f85</id>
<content type='text'>
c832ed2cfbd4 ipq5018: add Lite-On WPX8324 BDFs

Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq-wifi: update to Git HEAD (2026-11-16)</title>
<updated>2026-11-16T19:36:05Z</updated>
<author>
<name>Robert Marko</name>
</author>
<published>2026-11-16T19:35:52Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=a729ee7a1b98952d69c3b4f0d59ac8fbb2e3acb9'/>
<id>urn:sha1:a729ee7a1b98952d69c3b4f0d59ac8fbb2e3acb9</id>
<content type='text'>
8f2057e29da8 ipq5018/qcn9074: add Ubiquiti UniFi 6 Pro board files

Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
<entry>
<title>ipq-wifi: add BDFs for IPQ4019 Aruba boards</title>
<updated>2026-11-12T18:27:03Z</updated>
<author>
<name>David Bauer</name>
</author>
<published>2026-11-12T10:41:03Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=806db56d3d857c3b32eb79da44918f15bd356a0b'/>
<id>urn:sha1:806db56d3d857c3b32eb79da44918f15bd356a0b</id>
<content type='text'>
The ones used upstream were extracted from the wrong offsets.

Create BDF packages to be included in device-specific packages.

Signed-off-by: David Bauer &lt;mail@david-bauer.net&gt;
</content>
</entry>
<entry>
<title>ipq-wifi: add Aruba AP-325 BDF</title>
<updated>2026-11-12T18:27:03Z</updated>
<author>
<name>David Bauer</name>
</author>
<published>2026-11-12T10:37:13Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=488cf8781be7ef24baa96bcb4cd432fd9eb9f637'/>
<id>urn:sha1:488cf8781be7ef24baa96bcb4cd432fd9eb9f637</id>
<content type='text'>
Signed-off-by: David Bauer &lt;mail@david-bauer.net&gt;
</content>
</entry>
<entry>
<title>ipq-wifi: update to latest HEAD</title>
<updated>2026-11-12T18:27:03Z</updated>
<author>
<name>David Bauer</name>
</author>
<published>2026-11-12T18:22:40Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=b62ab40710061e6b6443db85699b78196dfb7b10'/>
<id>urn:sha1:b62ab40710061e6b6443db85699b78196dfb7b10</id>
<content type='text'>
e1c4cba ipq4019: add Aruba IPQ4019 BDFs
bb53fb2 qca9990: add Aruba AP-325 BDF
5363395 qcn9074: add Arista C-360 BDF
e50b021 ipq8074: add Arista C-360 BDF
9157db7 ipq4019: add Gryphon Guardian BDF
eab1e7b ipq9574/qcn9074: add Nokia Beacon 10 board files
3796b7f ipq6018: add Redmi AX5 JDCloud (RA50) board file

Signed-off-by: David Bauer &lt;mail@david-bauer.net&gt;
</content>
</entry>
<entry>
<title>linux-firmware: stage MT7987 2.5G PHY firmware for the U-Boot build</title>
<updated>2026-11-03T17:40:42Z</updated>
<author>
<name>John Crispin</name>
</author>
<published>2026-08-15T05:48:53Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=68700f4140bd4e7ea0022f36a1d521b2f1f90a22'/>
<id>urn:sha1:68700f4140bd4e7ea0022f36a1d521b2f1f90a22</id>
<content type='text'>
U-Boot's mtk-2p5ge driver downloads firmware to the MT7987 built-in 2.5G
PHY, and loads it by running an environment script that reads the blob
from storage. The blob therefore has to reach the U-Boot build, not just
the rootfs.

Copy both blobs into STAGING_DIR_IMAGE on filogic, so that uboot-mediatek
can link them into the BE10000 U-Boot. This follows what airoha-en8811h-firmware
already does for EthMD32.bin.

Signed-off-by: John Crispin &lt;john@phrozen.org&gt;
</content>
</entry>
<entry>
<title>mipi-dbi: add init sequences for the GL.iNet GL-BE10000 and GL-BE14000</title>
<updated>2026-11-03T17:40:42Z</updated>
<author>
<name>John Crispin</name>
</author>
<published>2026-10-26T15:06:51Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=b09cbfe7d2f234e8313c5d3151801d58dd533c9a'/>
<id>urn:sha1:b09cbfe7d2f234e8313c5d3151801d58dd533c9a</id>
<content type='text'>
Both boards carry a Sitronix ST7789P3 LCD with the vendor init
sequence. The panels are mounted 180 degrees apart, so the two sequences
differ in the MADCTL byte alone: 0xa0 on the GL-BE10000 and 0x60 on the
GL-BE14000.

panel-mipi-dbi loads the firmware named after the first compatible of
the panel node, so each board gets its own file and its own package.

Signed-off-by: John Crispin &lt;john@phrozen.org&gt;
</content>
</entry>
<entry>
<title>ipq40xx: include TP-Link Deco M5 board data</title>
<updated>2026-10-29T21:16:48Z</updated>
<author>
<name>Chris van Oijen</name>
</author>
<published>2026-10-10T22:46:53Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=5700101d7c85381889d890dc1d3d001d0b4b6446'/>
<id>urn:sha1:5700101d7c85381889d890dc1d3d001d0b4b6446</id>
<content type='text'>
Register the shared Deco M5 board-data package and include it in the
v1, v2 and v3 images. The pinned qca-wireless source already contains
the v1 and v3 calibration variants referenced by their device trees.

Signed-off-by: Chris van Oijen &lt;dutchmillbytes@gmail.com&gt;
Link: https://github.com/openwrt/openwrt/pull/25905
Signed-off-by: Hauke Mehrtens &lt;hauke@hauke-m.de&gt;
</content>
</entry>
<entry>
<title>qualcommax: ipq60xx: add support for Wallys DR6018S</title>
<updated>2026-10-27T09:36:23Z</updated>
<author>
<name>Alan Gao</name>
</author>
<published>2026-10-27T01:59:37Z</published>
<link rel='alternate' type='text/html' href='https://git-03.infra.openwrt.org/openwrt/staging/stintel/commit/?id=01573cdc37e86b5e5308fffc81244b805bfb97f1'/>
<id>urn:sha1:01573cdc37e86b5e5308fffc81244b805bfb97f1</id>
<content type='text'>
The Wallys DR6018S is a dual-band Wi-Fi 6 board based on the
Qualcomm-Atheros IPQ6010 platform.

Product specification:
https://www.wallystech.com/upload/DR6018S.pdf

Hardware:
- Qualcomm-Atheros IPQ6010 quad-core ARM 64-bit A53 processor at 1.8 GHz
- 1 GB DDR3L memory (2 x 512 MB)
- 8 MB NOR flash and 256 MB NAND flash
- Two 1 Gbps Ethernet ports with a QCA8075 PHY package
- One Ethernet port supports passive or active PoE
- Integrated 2x2 2.4 GHz 802.11ax radio, up to 573 Mbps
- Integrated 2x2 5 GHz 802.11ax radio, up to 1201 Mbps
- M.2 NGFF E-key socket with PCIe 3.0 support for an optional QCN9074
  Wi-Fi module
- Optional SD card slot
- Optional USB 3.0 port
- Four-pin serial connector using GPIO44/GPIO45 at 115200 8N1
- Four status LEDs and one reset button
- Four MMCX antenna connectors
- 24-48 V DC input with passive and active PoE support

This adds the device tree, FIT/UBI image definitions, network defaults,
NVMEM-backed ART calibration and MAC address extraction, NAND sysupgrade
support and optional QCN9074 PCIe Wi-Fi support.

The SD card slot and USB 3.0 port are listed as board capabilities from
the vendor specification. They are not required for the tested onboard
Wi-Fi configuration.

MAC address layout:
- WAN: MAC stored in 0:ART at offset 0x0000
- LAN: MAC stored in 0:ART at offset 0x0006
- 2.4 GHz and 5 GHz Wi-Fi: calibration and radio MACs stored in the
  calibration block at 0:ART offset 0x1000

The MAC addresses are unit-specific and are not hard-coded.

Board data is submitted separately through firmware_qca-wireless.

Installation:
1. Boot the initramfs image through the vendor U-Boot:

   setenv serverip 192.168.1.4
   setenv ipaddr 192.168.1.1
   tftpboot 0x44000000 openwrt-qualcommax-ipq60xx-wallys_dr6018s-initramfs-uImage.itb
   bootm 0x44000000

2. Transfer the sysupgrade image to /tmp and install it:

   sysupgrade -n /tmp/openwrt-qualcommax-ipq60xx-wallys_dr6018s-squashfs-sysupgrade.bin

Tested on a Wallys DR6018S:
- Booting the initramfs image from the vendor U-Boot
- Installing OpenWrt to SPI NAND
- Rebooting and cold-booting from the installed system
- 2.4 GHz and 5 GHz AP operation
- QCN9074 PCIe module enumeration and Wi-Fi operation
- Ethernet connectivity
- Correct Ethernet and Wi-Fi MAC addresses

Signed-off-by: Alan Gao &lt;1226010136@qq.com&gt;
Link: https://github.com/openwrt/openwrt/pull/25955
Signed-off-by: Robert Marko &lt;robimarko@gmail.com&gt;
</content>
</entry>
</feed>
