staging/neocturne/package/utils, branch main

util-linux: update to v2.40.1

2024-06-20T12:06:41Z

Release Notes: https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.40/v2.40-ReleaseNotes https://mirrors.edge.kernel.org/pub/linux/utils/util-linux/v2.40/v2.40.1-ReleaseNotes Remove upstreamed: 001-meson-properly-handle-gettext-non-existence.patch New: 0001-meson-Fix-build-python-option.patch Signed-off-by: Thomas Weißschuh

yafut: update to fix basename() issue

2024-06-11T12:27:47Z

Since musl 1.2.5 update yafut would throw a warning about implicit declaration of basename() but would still somehow compile. However, trying to use it on a device will cause it to instantly Segmentation fault. So, to fix this lets update to the current upstream repository version that has removed the use of basename() completely. Link: https://github.com/openwrt/openwrt/pull/15685 Signed-off-by: Robert Marko

mdadm: update to 4.3

2024-06-06T20:02:21Z

Backport three patches, add one for GCC14, and add Alpine time_t patch for musl. Signed-off-by: Rosen Penev

yafut: sync version between tools/ and package/ directories

2024-06-05T15:03:24Z

Use the same Yafut code revision for both updating devices with NAND flash and preparing firmware images for devices with NOR flash. Signed-off-by: Michał Kępień Link: https://github.com/openwrt/openwrt/pull/13453 Signed-off-by: Robert Marko

package/utils/secilc: drop PKG_CPE_ID

2024-06-02T18:49:48Z

cpe:/a:selinuxproject:secilc is not a correct CPE ID for secilc: https://nvd.nist.gov/products/cpe/search/results?keyword=cpe:2.3:a:selinuxproject:secilc Fixes: 9ee7c1ec60e23f25f5d275c6439ce93aec914e1c (secilc: adds new package) Signed-off-by: Fabrice Fontaine Link: https://github.com/openwrt/openwrt/pull/15298 Signed-off-by: Robert Marko

kirkwood: add D-Link DNS-320L support

2024-05-31T23:29:09Z

Dual-slot NAS based on Marvell Kirkwood. Specifications: - Marvell 88F6702 @1GHz - 256Mb RAM - 128Mb NAND - 1x GbE LAN (Marvell 88E1318R) - 1x USB 2.0 - 2x SATA - Weltrend WT69P3 ("supervisor" MCU chip) - Serial on J2 (115200,8n1) - Newer bootROM so kwboot-ing via serial is possible Notes: - The Weltrend MCU is controlled by the package added in utils/dns320l-mcu. - The original MAC address is stored in the "mini firmware" image's first 17 bytes. - Compared to the original MTD layout, the uImage+rootfs are now stored in a common ubi partition. Installation: 1. Serial console - Connect your levelshifter to the serial console on J2 (refer to the wiki page for pinout) 2. Update u-boot - Download the u-boot.kwb image for the device - Powercycle the NAS - Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p" - Connect to the serial console with minicom - tftp 0x0800000 u-boot-dns320l/u-boot.kwb (Please note that "PHY reset timed out" seems to be customary on kirkwood devices, the egiga0 interface works regardless.) - nand erase 0x0 100000 - nand write 0x0800000 0x0 0x100000 - reset 3. Install OpenWrt - Boot up the initramfs image - tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000 - Download the sysupgrade image and perform sysupgrade Signed-off-by: Zoltan HERPAI Reviewed-by: Pawel Dembicki

usbmode: add Huawei E5785

2024-05-23T20:49:25Z

This 4G/LTE modem is a WiFi hotspot, and also works as cdc_ether modem when plugged over USB. It needs usb-modeswitching. With HuaweiNewMode, it will modeswitch from 3426:1f01 (mass-storage) to 3426:14db (cdc_ether). Signed-off-by: Didier 'OdyX' Raboud Link: https://github.com/openwrt/openwrt/pull/15497 Signed-off-by: Robert Marko

audit: fix compile error on some systems

2024-05-13T08:12:06Z

On Fedora 40, -Wimplictit-function-declaration error is occur when compiling audit package. Upstream fixed this problem, so backport the patch. https://github.com/linux-audit/audit-userspace/pull/371 Signed-off-by: Yanase Yuki Link: https://github.com/openwrt/openwrt/pull/15441 Signed-off-by: Robert Marko

bcm27xx-utils: update to latest version

2024-05-10T07:17:52Z

Full changelog: https://github.com/raspberrypi/utils/compare/e65f5ec102e74218cda7da9fdc8b1caa0fd1127d...451b9881b72cb994c102724b5a7d9b93f97dc315 Signed-off-by: Álvaro Fernández Rojas

ucode: update to Git HEAD (2024-05-09)

2024-05-08T22:56:56Z

cfe137be068a uci: remove incorrectly documentated reorder() parameter e8d78a26da0c lib: introduce socket library a0ad1d127ae6 build: fix symbol and library detection 674f65ee551d jsdoc: disable default module titles a33d16a86493 socket: rework error handling e2b81d869222 uloop: add documentation 953f36c96e8a socket: make socket.send() accept non-string data f211d5ac666f ubus: fix uc_ubus_have_uloop for eloop+uloop combination 0662de64bd1f socket: add AF_PACKET socket type support b594ff8a2841 socket: remove leftover debug code 0d823e702bfe socket: fix addrinfo() with omitted service argument Signed-off-by: Jo-Philipp Wich