staging/blogic/package/kernel, branch master

netsupport: move out sch_cake from kmod-sched

2019-07-09T12:54:24Z

Fix file installation clash between kmod-sched & kmod-sched-cake as both try to install sch_cake.ko Remove cake from kmod-sched package as cake is supposed to be the optional qdisc. Signed-off-by: Kevin Darbyshire-Bryant

netsupport: move out mqprio from kmod-sched

2019-07-08T14:42:26Z

Currently, there's unable to install "kmod-sched-mqprio" after "kmod-sched" (or vice versa), because "sch_mqprio.ko" is shipped in both packages. Fixes: f83522fa6361 ("linux: Add kmod-sched-mqprio") Fixes: 6af639e0bf78 ("linux: Add kmod-sched-act-vlan") Fixes: 72c7e2dc467c ("linux: Add kmod-sched-flower") Signed-off-by: Konstantin Demin [Add cls_flower and act_vlan] Signed-off-by: Hauke Mehrtens

kmod-sched-cake: drop out of tree package, use kernel version

2019-07-08T10:05:43Z

CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can drop the out of tree cake package in base repository. Add kmod-sched-cake to netsupport so package dependencies are still met. Similarly CAKE is retained as an optional qdisc module to avoid base scheduler package size implications. Backport upstream patches from k5.1 to address some small bugs and support fwmark usage. Signed-off-by: Kevin Darbyshire-Bryant

mt76: update to the latest version

2019-07-04T18:15:00Z

6cafaca mt7603: use READ_ONCE instead of ACCESS_ONCE 9e2e0b8 mt76: round up length on mt76_wr_copy e378ef1 mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer 7991dd7 mt76: mt7615: introduce mt7615_regd_notifier 901a4c7 mt76: mt7615: add hw dfs pattern detector support 57c600e mt76: mt7615: do not perform txcalibration before cac is complited 6afc952 mt76: mt7615: add csa support 8919516 mt76: mt7615: add radar pattern test knob to debugfs 3be723c mt76: mt7615: clean up FWDL TXQ during/after firmware upload 47fe37e mt76: mt7615: fall back to sw encryption for unsupported ciphers bc5e041 mt76: mt7603: enable hardware rate up/down selection ae760db mt76: mt7615: move mt7615_mcu_set_rates to mac.c 2ae01f7 mt76: mt7615: reset rate index/counters on rate table update 6f98378 mt76: mt7615: sync with mt7603 rate control changes edbe88e mt76: usb: fix endian in mt76u_copy f43b622 mt76: usb: remove unneeded {put,get}_unaligned 5e1e5b7 mt76: usb: use full intermediate buffer in mt76u_copy 017d0ff mt76: mt76u: fix typo in mt76u_fill_rx_sg 2c0ccf1 mt76: mt7615: always release sem in mt7615_load_patch 0c6f1a2 mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine 3dfc1ee mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types) 9475320 mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types) e07451d mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16 b973bef mt7603: do not use tssi-off power value for mt7628 Signed-off-by: Felix Fietkau

lantiq: ltq-tapi: fix compatibility with Linux 4.15+

2019-07-04T06:29:13Z

Linux 4.15 removes the init_timer() API. It's replaced by two functions: - timer_setup() is used instead of init_timer() and also replaces the timer "function" (callback) setup. - from_timer() has to be used to obtain the use-case specific data from a struct timer_list, which is now passed to the timer callback. Update the timer API to be compatible with Linux 4.15+ so it compiles with the upcoming Linux 4.19 kernel update. Signed-off-by: Martin Blumenstingl

mt76: update to the latest version, adds preliminary mt7615 support

2019-06-25T11:24:49Z

b3a2965 mt76x02: fix crash on device reset ffddb68 mt76x02u: check chip version on probe 7fc5f92 mt76x2u: remove duplicated entry in mt76x2u_device_table 61311d9 mt76: introduce mt76_free_device routine a7dfcf2 mt76: move mac_work in mt76_dev 334b4ce mt76: add mac80211 driver for MT7615 PCIe-based chipsets edb2a00 mt76: add unlikely() for dma_mapping_error() check 355c079 mt76: use macro for sn and seq_ctrl conversion 133bffb add firmware for MT7615E 49d9c1b mt76: usb: reduce locking in mt76u_tx_tasklet 3e371ca mt76: set txwi_size according to the driver value 5007326 mt76: add skb pointer to mt76_tx_info c47a568 mt76: dma: introduce skb field in mt76_txwi_cache 9029560 mt76: dma: add skb check for dummy pointer e9eea39 mt76: mt7615: use sizeof instead of sizeof_field 98c5359 Revert "mt76: fix potential deadlock on cancelling workqueues" bc9baa7 mt76x02u: remove bogus stop on suspend 6c1cab9 mt76usb: fix tx/rx stop 0e674c5 mt76x02: remove bogus mutex usage 59f7bb6 Revert "mt76: mt76x02: send no-skb tx status without holding the status lock" b0f2a30 mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency 62054de mt76: mt7603: remove query from mt7603_mcu_msg_send signature e79d96a mt76: mt7603: use standard signature for mt7603_mcu_msg_send be8f039 mt76: mt7603: initialize mt76_mcu_ops data structure 9a9c656 mt76: introduce mt76_mcu_restart macro 980b91e mt76: mt7603: init mcu_restart function pointer a97db3f mt76: mt7603: run __mt76_mcu_send_msg in mt7603_mcu_send_firmware 151115f mt76: mt76x02: mt76x02_poll_tx() can be static 7391f98 mt76: fix endianness sparse warnings 6c06f73 mt76: mt7603: report firmware version using ethtool f06647e mt76: usb: use EP max packet aligned buffer sizes for rx f43fccf mt76: move beacon_int in mt76_dev 74ab2cf mt76: move beacon_mask in mt76_dev 23c2f94 mt76: add TX/RX antenna pattern capabilities 6e790e1 mt76: move pre_tbtt_tasklet in mt76_dev 7606c08 mt76: mt7603: enable/disable pre_tbtt_tasklet in mt7603_set_channel ff22eee mt76: do not enable/disable pre_tbtt_tasklet in scan_start/scan_complete 3157385 mt76: mt7603: dynamically alloc mcu req in mt7603_mcu_set_eeprom cc674e2 mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer 6b18427 mt76: move tx_napi in mt76_dev bce63c4 mt76: mt7603: use napi polling for tx cleanup 4afd89e mt76: mt7615: use napi polling for tx cleanup 2cb4683 mt76: move netif_napi_del in mt76_dma_cleanup b4ceb9f mt76: Fix a signedness bug in mt7615_add_interface() d00dc95 mt76: mt7615: Use after free in mt7615_mcu_set_bcn() 4e0ccc6 mt76: mt7615: Make mt7615_irq_handler static 0fd552a mt7615: mcu: simplify __mt7615_mcu_set_wtbl 50f7094 mt7615: mcu: simplify __mt7615_mcu_set_sta_rec 4434d04 mt7615: mcu: remove bss_info_convert_vif_type routine 083fbb9 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc f61ca80 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl 35bd12d mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc f8f990b mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl 965bca1 mt7615: remove query from mt7615_mcu_msg_send signature 9b9ca18 mt7615: remove dest from mt7615_mcu_msg_send signature 935b7e5 mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send 2442db4 mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info 645bc45 mt7615: mcu: do not use function pointers whenever possible 40c4201 mt7615: mcu: remove unused structure in mcu.h a8834a2 mt7615: mcu: use standard signature for mt7615_mcu_msg_send 824d25c mt7615: initialize mt76_mcu_ops data structure d943427 mt7615: mcu: init mcu_restart function pointer c2211e4 mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware cb63a06 mt76: mt7603: stop mac80211 queues before setting the channel c6aaa3a mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device 97609f3 mt76: mt7615: add static qualifier to mt7615_rx_poll_complete f9dadd2 mt76: mt7603: add debugfs knob to enable/disable edcca 89cda5d mt7603: fix reading target tx power from eeprom 77d0e33 mt76: fix setting chan->max_power f575da2 mt76: mt76x02: fix tx status reporting issues a5d18dc mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu bd32a93 mt76: mt76x02: remove enable from mt76x02_edcca_init signature 18386ee mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel da3514f mt76: mt76x2: move mutex_lock inside mt76x2_set_channel 0d4719c mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set fd5af73 mt76: mt76x02: fix edcca file permission a0f51f2 mt76: mt7615: do not process rx packets if the device is not initialized 753cdee mt76: mt7615: stop mcu first in mt7615_unregister_device 899efe7 mt76: move mt76_insert_ccmp_hdr in mt76-module 6960b6e mt76: mt7615: add support for mtd eeprom parsing 4bcb057 mt76: mt7615: select wifi band according to eeprom 866f2c6 mt76: generalize mt76_get_txpower for 4x4:4 devices 514fb04 mt76: mt7615: add the capability to configure tx power ced9d43 mt76: mt7615: init get_txpower mac80211 callback 8abd502 mt76: mt7615: rearrange locking in mt7615_config 5b9b62e mt76: move mt76_get_rate in mt76-module 661c7c8 mt76: Remove set but not used variables 'pid' and 'final_mpdu' f072c7b mt76: mt7615: enable support for mesh 28d9496 mt76: mt7615: fix slow performance when enable encryption 827b9ad mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn 34eea14 mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key 2bfae5a mt76: usb: fix rx A-MSDU support b033532 mt76: usb: do not always copy the first part of received frames 3e7fc15 mt76x02: fix reporting of non-probing frames with tx status requested 0d5caea Revert "mt76: usb: do not always copy the first part of received frames" 335e8c6 Revert "mt76: usb: fix rx A-MSDU support" 47ddf4b mt76: revert support for TX_NEEDS_ALIGNED4_SKBS 0b6520b mt7603: rework and fix tx status reporting 539b679 mt7603: improve hardware rate switching configuration d86d6ef mt76x0: fix RF frontend initialization for external PA f476a14 mt76x02: fix endian issue in tx status reporting patch f8d0517 mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine 73ff45f mt76: mt7615: add support for per-chain signal strength reporting 9b67ae6 mt76: mt7615: init per-channel target power 160fdc0 mt76: mt7615: take into account extPA when configuring tx power 2211d93 mt76: mt76x02u: fix sparse warnings: should it be static? 3750533 mt76: mt7615: fix incorrect settings in mesh mode c37c1ca mt76: mt7615: update peer's bssid when state transition occurs 9dd1089 mt76: mt76u: reduce rx memory footprint 0789f45 mt76: mt7615: remove cfg80211_chan_def from mt7615_set_channel signature 2dca431 mt76: move nl80211_dfs_regions in mt76_dev data structure 3386ccf mt76: mt76u: get rid of {out,in}_max_packet d680ab0 mt76: usb: fix rx A-MSDU support Signed-off-by: Felix Fietkau

mac80211: add rate control support for 4 spatial streams, improve precision

2019-06-25T11:24:49Z

Signed-off-by: Felix Fietkau

kernel: alx driver for AR816x/AR817x Ethernet

2019-06-22T11:17:47Z

These ethernet cards can be found onboard various x86 and x86_64 Gigabyte mainboards since the sandy-bridge/ ivy-bridge era. This driver supports the following QCA/"Killer" ethernet cards: 1969:1091 - AR8161 Gigabit Ethernet 1969:1090 - AR8162 Fast Ethernet 1969:10A1 - AR8171 Gigabit Ethernet 1969:10A0 - AR8172 Fast Ethernet 1969:E091 - Killer E2200 Gigabit Ethernet 1969:E0A1 - Killer E2400 Gigabit Ethernet 1969:E0B1 - Killer E2500 Gigabit Ethernet Successfully runtime tested with the onboard ethernet card of a Gigabyte GA-H77M-D3H ivy-bridge mainboard (x86_64/EFI image): 02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 [...] Subsystem: Gigabyte Technology Co., Ltd AR8161 [...] Kernel driver in use: alx Kernel modules: alx alx 0000:02:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [...] alx 0000:02:00.0 eth0: NIC Up: 1 Gbps Full Signed-off-by: Stefan Lippers-Hollmann Signed-off-by: Christian Lamparter [fix typo, shorten subject to <50 characters, shorten lines to <76 chars.]

mac80211: update WDS/4addr fix to the version accepted upstream

2019-06-22T11:17:47Z

This updates "{nl,mac}80211: allow 4addr AP operation on crypto controlled devices" to the version (v3), which was accepted into upstream mac80211.git and which is tagged for -stable backporting (v4.18+). https://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git/commit/?id=33d915d9e8ce811d8958915ccd18d71a66c7c495 Signed-off-by: Stefan Lippers-Hollmann Signed-off-by: Christian Lamparter [format-patch]

kernel: fix kmod-tpm 4.19 dependencies

2019-06-22T11:17:47Z

This patch fixes the ath79-nand build error: |Package kmod-tpm is missing dependencies for the following libraries: |rng-core.ko by making it depend on rng-core from 4.19 onwards. This should work as 4.9 is gone so only 4.14 and 4.19 are there. Signed-off-by: Christian Lamparter