staging/blocktrron/package/firmware, branch master

wireless-regdb: Update to version 2025.10.07

2025-11-08T20:15:51Z

e51d568 wireless-regdb: update regulatory rules for Botswana (BW) for 2022 5afc632 wireless-regdb: update regulatory rules for Sint Marteen (SX) for 2018 b484a31 wireless-regdb: Update regulatory info including bandwidth for Costa Rica (CR) for 2023 39e5e04 wireless-regdb: Permit lower 6 GHz band for Kazakhstan (KZ) a827d3a wireless-regdb: update regulatory database based on preceding changes Link: https://github.com/openwrt/openwrt/pull/20544 Signed-off-by: Hauke Mehrtens

linux-firmware: update to 20251021

2025-10-23T20:03:31Z

% git log --no-merges --pretty=oneline --abbrev-commit 20251011...20251021 b0b775e5ad10 Revert "linux-firmware: update firmware for MT7922 WiFi device" d06442f2b6f5 QCA: Update Bluetooth WCN6856 firmware 2.1.0-00653 to 2.1.0-00659 9440754a997a iwlwifi: add Bz/Fm and gl FW for core98-161 release f2fbfd22d9d1 iwlwifi: update Bz/Hr and Bz/Gf firmwares for core98-161 release dda8b9b09a1c iwlwifi: update ty/So/Ma firmwares for core98-161 release 822db3708dbc iwlwifi: update cc/Qu/QuZ firmwares for core98-161 release edc9bbecf0fe intel: qat: Fix missing link 80bca4b3d75e amdgpu: DMCUB updates for various ASICs 7a1a266e22f1 nvidia: add generic bootloader for GSP-enabled systems 2121082a8884 linux-firmware: qcom: sync audioreach firmwares from v1.0.0 build 4ba7ff78711b qcom: vpu: rename firmware binaries 15cb201918e5 Intel IPU7: Update product signed firmware binary 10de40e2bb55 i915: Xe2LPD DMC v2.29 4bda88bd3a9f i915: Xe3LPD DMC v2.32 afae3516d1d8 i915: Xe3LPD_3002 DMC v2.27 bcce0efb5c4a WHENCE: nvidia: rearrange GSP-RM firmware lines a96c15581a53 linux-firmware: Add ISH firmware file for Intel Pather Lake platform 55d8d2fa006b linux-firmware: Update firmware file for Intel Magnetar core 890cad9f8387 linux-firmware: Update firmware file for Intel BlazarU core 7bbab634ede0 linux-firmware: Update firmware file for Intel BlazarI core Build system: x86/64 Build-tested: x86/64-glibc Run-tested: x86/64-glibc Signed-off-by: John Audia Link: https://github.com/openwrt/openwrt/pull/20504 Signed-off-by: Nick Hainke

ipq-wifi: Add entry for TP-Link Archer C60 v2

2025-10-22T09:37:14Z

Add IPQ Wifi entry for ath79 TP-Link Archer C60 v2. Signed-off-by: Christoph Krapp Link: https://github.com/openwrt/openwrt/pull/20496 Signed-off-by: Robert Marko

ipq-wifi: update to Git HEAD (2025-10-22)

2025-10-22T09:36:29Z

c585e435c611 ipq6018: add jdcloud_re-cs-02 BDF 14aef623f3e5 qcn9074: add jdcloud_re-cs-02 BDF ec6831a43ff0 qca9888: replace TP-Link Archer C60 v2 BDF Signed-off-by: Robert Marko

ipq40xx: add support for Cisco Meraki MR30H

2025-10-19T17:33:18Z

This commit adds support for the Cisco Meraki MR30H. The MR30H is a POE powered 802.11ac access point with an integrated 5 port Gigabit switch. MR30H hardware info: * CPU: Qualcomm IPQ4029 * RAM: 256MB DDR3 * Storage: 128 MB (S34ML01G200TFV00) * Networking: QCA8075 internal switch (5x 1GbE ports) * WiFi: QCA4019 802.11b/g/n/ac, QCA9889 802.11/b/g/n/ac scanning radio * Serial: Internal header (J8, 2.54mm, populated) LAN5 (rear) is for POE input. LAN4 has POE output (802.3af) when powered by an 802.3at source. The LAN4 port is used for tftp booting in U-Boot. This device does not have secure boot, but cannot be flashed without external programmers (TSOP48 NAND) as Meraki disabled interrupting U-Boot for any device that updated after ~2017. Disassembly: * Remove the two T10 screws on the rear of the AP. * Using a guitar pick or similar plastic tool, insert it on the side between the grey metal plate and the white plastic body and pry up gently. * The rubberised border on the metal plate does not need to be removed. * The metal back plate has several latches around the perimeter (but none on the bottom by the Ethernet ports). * Once you have removed the metal back plate, push up gently on the bottom Ethernet ports while pulling gently on the rear-mounted Ethernet port to remove the PCB. * The PCB should come free from the plastic housing, pull the bottom (4 Ethernet ports) up as if you are opening a book. * If done carefully, there is no need to remove the WiFi antenna connectors to access the NAND flash. * The TSOP48 NAND flash (U30, Spansion S34ML01G200TFV00) is located on the opposite side of the PCB. * To flash, you need to desolder the TSOP48 or use a 360 clip. Installation: The dumps to flash can be found in this repository: https://github.com/halmartin/meraki-openwrt-docs/tree/main/mr30h The device has the following flash layout (offsets with OOB data): ``` 0x000000000000-0x000000100000 : "sbl1" 0x000000100000-0x000000200000 : "mibib" 0x000000200000-0x000000300000 : "bootconfig" 0x000000300000-0x000000400000 : "qsee" 0x000000400000-0x000000500000 : "qsee_alt" 0x000000500000-0x000000580000 : "cdt" 0x000000580000-0x000000600000 : "cdt_alt" 0x000000600000-0x000000680000 : "ddrparams" 0x000000700000-0x000000900000 : "u-boot" 0x000000900000-0x000000b00000 : "u-boot-backup" 0x000000b00000-0x000000b80000 : "ART" 0x000000c00000-0x000007c00000 : "ubi" ``` * Dump your original NAND (if using nanddump, include OOB data). * Decompress `u-boot.bin.gz` dump from the GitHub repository above (dump contains OOB data) and overwrite the `u-boot` portion of NAND from `0x738000`-`0x948000` (length `0x210000`). Offsets here include OOB data. * Resolder the NAND after overwriting the `u-boot` regions. OpenWrt Installation: * After flashing NAND with the external programmer. Plug an Ethernet cable into port 4. Power up the device. * The new U-Boot build uses the space character `" "` (without quotes) to interrupt boot. * Interrupt U-Boot and `tftpboot` the OpenWrt initramfs image from your tftp server ``` dhcp setenv serverip tftpboot openwrt-ipq40xx-generic-meraki_mr30h-initramfs-uImage.itb ``` * Once booted into the OpenWrt initramfs, `scp` the `sysupgrade` image to the device and run the normal `sysupgrade` procedure: ``` scp -O openwrt-ipq40xx-generic-meraki_mr30h-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/ ssh root@192.168.1.1 "sysupgrade -n /tmp/openwrt-ipq40xx-generic-meraki_mr30h-squashfs-sysupgrade.bin" ``` * OpenWrt should now be installed on the device. Alternative installation steps if your device has U-Boot older than: `U-Boot 2017.07-RELEASE-g78ed34f31579 (Sep 29 2017 - 07:43:44 -0700)` **BIG FAT WARNING BEGIN** Attmping to interrupt boot on a newer U-Boot release may permanently brick your device! See: riptidewave93/LEDE-MR33#13 **BIG FAT WARNING END** * Use `ubootwrite.py` from the above GitHub repository to transfer the `u-boot.itb` image to the router. ``` ./ubootwrite.py --serial=/dev/ttyUSB0 --write u-boot.itb ``` * To avoid bricking your router, it is highly recommended at this point that you flash the unlocked U-Boot to the `part.safe` ubi volume. ``` run set_ubi && ubi write $loadaddr part.safe 0x2fd48 ``` * Power cycle the router. The stock Meraki U-Boot will boot `part.safe` which is now the unlocked U-Boot. * Use the new U-Boot build (`" "` to interrupt boot) to `tftpboot` the OpenWrt initramfs image: ``` dhcp setenv serverip tftpboot openwrt-ipq40xx-generic-meraki_mr30h-initramfs-uImage.itb bootm ``` * It is only recommended to flash U-Boot to the `u-boot` NAND region from Linux: ``` insmod mtd-rw i_want_a_brick=1 ``` * Copy `u-boot.elf` to the router: ``` scp -O u-boot.elf root@192.168.1.1:/tmp/ ``` Note: If any of the below commands fails, YOU WILL HAVE A BRICK IF YOU REBOOT OR LOSE POWER. Only a hardware programmer can recover the device. ``` flash_erase /dev/mtd8 0 0 nandwrite -p /dev/mtd8 /tmp/u-boot.elf ``` Note: ONLY use `u-boot.elf` when flashing the `u-boot` region (`/dev/mtd8`); `u-boot.bin` or `u-boot.itb` will BRICK YOUR DEVICE * `scp` the `sysupgrade` image to the device and run the normal `sysupgrade` procedure: ``` scp -O openwrt-ipq40xx-generic-meraki_mr30h-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/ ssh root@192.168.1.1 "sysupgrade -n /tmp/openwrt-ipq40xx-generic-meraki_mr30h-squashfs-sysupgrade.bin" ``` * OpenWrt should now be installed on the device. Signed-off-by: Hal Martin Link: https://github.com/openwrt/openwrt/pull/17026 Signed-off-by: Robert Marko

ipq40xx: add support for Cisco Meraki Z3

2025-10-19T17:33:18Z

This commit adds support for the Cisco Meraki Z3. The Z3 is a "teleworker" device with 802.11ac and an integrated 5 port Gigabit switch. Z3 hardware info: * CPU: Qualcomm IPQ4029 * RAM: 512MB DDR3 * Storage: 128 MB (S34ML01G200TFV00) * Networking: QCA8075 internal switch (5x 1GbE ports) * WiFi: QCA4019 802.11b/g/n/ac * USB: 1x USB3.0 * Serial: Internal header (J8, 2.54mm, populated) Port 5 has POE output (802.3af). The Internet/WAN port is used for tftp booting in U-Boot. This device ships with secure boot, and cannot be flashed without external programmers (TSOP48 NAND and I2C EEEPROM)! Disassembly: * Remove the four T8 screws on the bottom of the device under the rubber feet. * Using a guitar pick or similar plastic tool, insert it on the side between the bottom case and the side, pry up gently. The plastic bottom has several latches around the perimeter (but none on the rear by the Ethernet ports). * The TSOP48 NAND flash (U30, Spansion S34ML01G200TFV00) is located on the bottom side of the PCB (facing you as you remove the bottom plastic). To flash, you will need to desolder the TSOP48. Attempts to flash in-circuit using a 360 clip were unsuccessful. * The SOIC8 I2C EEPROM (U32, Atmel 24C64) is located on the bottom side of the PCB (facing you as you remove the bottom plastic). It can be flashed in circuit using a SOIC8 chip clip. Installation: The dumps to flash can be found in this repository: https://github.com/halmartin/meraki-openwrt-docs/tree/main/z3_gx20 The device has the following flash layout (offsets with OOB data): ``` 0x000000000000-0x000000100000 : "sbl1" 0x000000100000-0x000000200000 : "mibib" 0x000000200000-0x000000300000 : "bootconfig" 0x000000300000-0x000000400000 : "qsee" 0x000000400000-0x000000500000 : "qsee_alt" 0x000000500000-0x000000580000 : "cdt" 0x000000580000-0x000000600000 : "cdt_alt" 0x000000600000-0x000000680000 : "ddrparams" 0x000000700000-0x000000900000 : "u-boot" 0x000000900000-0x000000b00000 : "u-boot-backup" 0x000000b00000-0x000000b80000 : "ART" 0x000000c00000-0x000007c00000 : "ubi" ``` * Dump your original NAND (if using nanddump, include OOB data). * Decompress `u-boot.bin.gz` dump from the GitHub repository above (dump contains OOB data) and overwrite the `u-boot` portion of NAND from `0x738000`-`0x948000` (length `0x210000`). Offsets here include OOB data. * Decompress `ubi.bin.gz` dump from the GitHub repository above (dump contains OOB data) and overwrite the `ubi` portion of NAND from `0xc60000`-`0x8400000` (length `0x77a0000`). Offsets here include OOB data. * Dump your original EEPROM. Change the byte at offset `0x49` to `0x1e` (originally `0x24`). Remember to re-write the EEPROM with the modified data. * This can be done on Linux via the following command: `printf "\x1e" | dd of=/tmp/eeprom.bin bs=1 seek=$((0x49)) conv=notrunc` **Note**: the device will not boot if you modify the board major number and have not yet overwritten the `ubi` and `u-boot` regions of NAND. * Resolder the NAND after overwriting the `u-boot` and `ubi` regions. OpenWrt Installation: * After flashing NAND and EEPROM with external programmers. Plug an Ethernet cable into the Internet/WAN port. Power up the device. * The new U-Boot build uses the space character `" "` (without quotes) to interrupt boot. * Interrupt U-Boot and `tftpboot` the OpenWrt initramfs image from your tftp server ``` dhcp setenv serverip tftpboot openwrt-ipq40xx-generic-meraki_z3-initramfs-uImage.itb ``` * Once booted into the OpenWrt initramfs, created the `ART` ubivol with the WiFi radio calibration from the mtd partition: ``` cat /dev/mtd10 > /tmp/ART.bin ubimkvol /dev/ubi0 -N ART -s 524288 ubiupdatevol /dev/ubi0_1 /tmp/ART.bin ``` * `scp` the `sysupgrade` image to the device and run the normal `sysupgrade` procedure: ``` scp -O openwrt-ipq40xx-generic-meraki_z3-squashfs-sysupgrade.bin root@192.168.1.1:/tmp/ ssh root@192.168.1.1 "sysupgrade -n /tmp/openwrt-ipq40xx-generic-meraki_z3-squashfs-sysupgrade.bin" ``` * OpenWrt should now be installed on the device. Signed-off-by: Hal Martin Link: https://github.com/openwrt/openwrt/pull/17026 Signed-off-by: Robert Marko

ipq-wifi: update to Git HEAD (2025-10-17)

2025-10-17T10:17:28Z

d818fb10428f qca4019: Add Meraki MR30H a1529e183333 qca4019: Add Meraki Z3 Signed-off-by: Robert Marko

linux-firmware: update to 20251011

2025-10-16T19:40:44Z

% git log --no-merges --pretty=oneline --abbrev-commit 20250917...20251011 25c3a14ddccc qcom: add CDSP firmware for kaanapali platform 0a5f7ace0a17 qcom: add version for A650 GMU firmware ff1f6b9a25d3 qca: Update Bluetooth WCN6750 1.1.3-00091 firmware to 1.1.3-00100 d387533db74f qcom: Add firmwares for Kaanapali GPU fe05c74066fc qcom: Update A623 GMU fw 6f2733131a80 qcom: Fix QCS615 chipset's GPU secure fw 80e2ccb38d41 qcom: Update DSP firmware for sa8775p platform 8d5c190abbc6 amdgpu: DMCUB updates for various ASICs 5905c27e13dc WHENCE: remove link for Kaanapali video firmware d2404284b6ce intel_vpu: Update NPU firmware 96ed5b3686d0 linux-firmware: Add Dell ISH firmware for Intel Lunar Lake systems b350d59cf4bc Update VCN for Navi1x, Green Sardine and Renoir f2bfc867f82d WHENCE: extract multitech license text e9fa2f97c9c0 WHENCE: extract ueagle license 6fae1670baa1 WHENCE: use LICENCE.sensoray for s2255drv bf9792cd07ec WHENCE: rename LICENCE.go7007-s2250 to LICENCE.sensoray 6d9abf208161 WHENCE: clean up emi62 and yam license statements 3baa8edc3517 qcom: vpu: update video firmware binary for SM8550 c77beb9847cc rtl_bt: Update RTL8852BT/RTL8852BE-VT BT USB FW to 0x3BAC_ADBA 7c2d4d41e96f qcom: vpu: add video firmware for Kaanapali 456617792f73 qcom: Update DSP firmware for qcs8300 platform. d5541743af93 qcom: Add Audio topology for HAMOA-EVK cefc001f7e0b intel/ish:Add ISH firmware file for Intel Lunar Lake platform 63335c21f5c3 mediatek: update firmware version info for MT7986/81/16 04a9bd578e9c linux-firmware: ql2500_fw: update ISP25xx Firmware 4d83de8a0909 qcom: Update aic100 firmware files 1378dc00cc60 qcom: Add audio topology and ADSP firmware for qcs6490-radxa-dragon-q6a e1514909489e amdgpu: DMCUB updates for various ASICs dba7fce5655a mediatek: mtk_wed: drop links for mt7988 d5eedab92c67 Revert "amdgpu: update gc 10.3.6 firmware" ad211e0ef885 qcom: Update DSP firmware for qcs8300 platform. b2d8bda61e46 powervr: update firmware for Imagination Technologies BXS-4-64 GPU 35d89f17d9f1 qcom: Update DSP firmware for sa8775p platform. 149fa16eb357 amdgpu: DMCUB updates for various ASICs 1d588f106cee ath12k: WCN7850 hw2.0: update board-2.bin 6625e563d600 qcom: move LEMANS EVK firmware to correct location Build system: x86/64 Build-tested: x86/64-glibc Run-tested: x86/64-glibc Signed-off-by: John Audia Link: https://github.com/openwrt/openwrt/pull/20415 Signed-off-by: Nick Hainke

ipq-wifi: Add entry for TP-Link Archer C59 v1

2025-10-14T15:50:54Z

Add IPQ Wifi entry for ath79 TP-Link Archer C59 v1. Signed-off-by: Christoph Krapp Link: https://github.com/openwrt/openwrt/pull/20401 Signed-off-by: Robert Marko

ipq-wifi: update to Git HEAD (2025-10-14)

2025-10-14T11:17:59Z

821d27b582c1 qca9888: add BDF for TP-Link Archer C59 v1 Signed-off-by: Robert Marko